Chosen Solution
I have checked all the fluids and replaced the oil and oil filter. Now I have an inspect (Inspection light on) in dash. I tried to reset and it remains on during starting only. Can someone tell me what I should do next?
For Keyless Start: Start with car turned off:
- For Inspection Reminder Reset: Turn on Emergency Flashers. Then press and hold Reset/0.0 Button on instrument cluster and push the Engine Start button (without starting engine - foot off brake).
- For Oil Change Reminder Reset: Don’t turn on Emergency Flashers. Then press and hold Reset/0.0 Button on instrument cluster and push the Engine Start button (without starting engine - foot off brake). For Key Start: Start with car turned off:
- For Inspection Reminder Reset: Turn on Emergency Flashers. Then press and hold Reset/0.0 Button on instrument cluster and Turn key to “ON” without starting the car. Look at dash for further instructions.
- For Oil Change Reminder Reset: Don’t turn on Emergency Flashers. Then press and hold Reset/0.0 Button on instrument cluster and Turn key to “ON” without starting the car. Look at dash for further instructions.
For vehicles with ‘Basic Display’ (wrench icon and INSPEC_ message) Reset the Inspection reminder: 1.Switch off the ignition. 2.Switch on the emergency flashers .3.Push the . button in the instrument cluster and hold down. 4.Switch on the ignition. 5.Release the . button and push the button in the instrument cluster within about 20 seconds. 6.Switch off the emergency flashers. To reset Service reminder: Same process except don’t activate hazard lights. P.S. don’t reset Service indicator unless the vehicle has been serviced or incorrect data will be displayed.
I reset mine and all is fine for approx two weeks then it tells me I need an oil change again! Any Clues?