Chosen Solution
Plz help me i will dropped my phone in water bucket now my phone is full working but navigation button is not working and getting black very little spot on screen downwards so how to repair. And i have a water seeing on side of screen.but not now.my phone is tecno i3.
Hi, As you know water and electronics and electricity are not a good mix. The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components. First do not turn on your phone and with the phone turned off you need to remove the battery as soon as possible to prevent any further damage. Then you need to dis-assemble the rest of the phone and clean all the affected parts using Isopropyl Alcohol 90%+ (available from most pharmacies) to remove all traces of corrosion and water. Do not use “rubbing alcohol” as in some cases this is <70% IPA, can contain scents and is not as effective. If you do check the label to verify the amount Here is a link that describes the process. Electronics Water Damage As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the boards. Hopefully after you have done all this the phone might possibly work correctly again. Here is a link to a video which may be of some help. (You may be able to find a better one ;-) If this process seems too daunting, take your phone to a reputable, professional mobile phone repair service, experienced in water damage repair and ask for a quote for a repair. If you decide to do this, do it sooner than later.
I have a similar problem as hers as well. I dropped my phone in milk (don’t ask how i even got to do that) but i immediately took out the battery and put it in some rice. It wasn’t the entire phone just the bottom part. Its a J7 prime by the way. After 3 hours or so i took it out and everything was working perfectly fine. I did a regular maintenance check and everything was quite fine with the phone. Until all of a sudden the navigation buttons stopped working. I added it back in rice and after taking it out, the buttons were working. After a 2 min or 3 they stopped again. I tried putting it and taking it out of rice continuously( i would leave it for 1 hour then take it out ) . The same problem arises. What could i do to fix this problem? Please help!
