Chosen Solution
The exit navigation light is stuck on cause it was in a puddle of water for 5 hours and it still had battery life but it vibrates for 30 min till and hours before stopping now the exit navigation light will not go off how do I fix this issue please someone help me with this????
Hi @calikyng_88 As you know water and electronics and electricity are not a good mix. The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components. First do not turn on your phone and with the phone turned off you need to remove the battery as soon as possible to prevent any further damage. Then you need to dis-assemble the rest of the phone and clean all the affected parts using Isopropyl Alcohol 90%+ (available from most pharmacies) to remove all traces of corrosion and water. Do not use “rubbing alcohol” as in some cases this is <70% IPA, can contain scents and is not as effective. If you do check the label to verify the amount Here is a link that describes the process. Electronics Water Damage As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the boards. Hopefully after you have done all this the phone might possibly work correctly again. Here is a link to the ifixit ZTE ZMax Pro Repair guide(s)which may be of some help. If this process seems too daunting, take your phone to a reputable, professional mobile phone repair service, experienced in water damage repair and ask for a quote for a repair. If you decide to do this, do it sooner than later.
