Chosen Solution
How to change the headlamp
ann, here are the steps from the service manual:
- Disconnect negative battery cable.
- Disconnect electrical connector from headlight assembly.
- Remove back cover by pushing in on cover, then rotating cover counterclockwise to disengage from headlight assembly. CAUTION: The headlight bulb is filled with a gas which is under pressure. Damage to glass part of bulb can cause bulb to explode causing possible personal injury.
- Pull socket with bulb straight back and remove it from headlight and combination light assembly.
- If bulb has failed, place it in new bulb carton and dispose of properly.
- Hold replacement bulb by base, or use clean cloth or paper to avoid touching glass, and install bulb in socket.
- Align slots on bulb with corresponding bosses on headlight assembly. Insert bulb into headlight and combination light assembly.
- Install back cover to hold bulb in place.
- Connect electrical connector.
- Connect negative battery cable. Hope this helps, good luck
Much too vague, completely useless. Anyone could have written this because it lacks any meaningful details. Not even a single picture. Why even bother to write this, it’s not going to do anything to help.