Posts

Chosen Solution I’m talking about the switch connected to the circuit board, not the plastic red/green cover that you manipulate from the outside of the headphones. What is the procedure for replacing the broken switch itself? Is welding required? Hi, Most probably the original switch will have to be unsoldered from the circuit board and the new switch soldered in its’ place. It may be a smd type component (it’s a bit hard to tell from the image (see below)....

Chosen Solution My iphone 6 home button is not working. If I replace home button flex cable does the home button and touch id will start to work? There are two elements to the Home Button in the iPhone 6. There is the actual home button itself. If this part is damaged, then there is nothing you can do to repair it and while you can replace it, it will never have Touch ID again....

Chosen Solution I was able to take my imac apart but i wasnt able to see any of the LEDs on the PSU. Do I need to remove the PSU from the imac to see that? Can someone point me to where there is a document that shows how to identify and use the LEDs to troubleshoot. Diagnostic LEDs The iMac (20-inch 2007) has four built-in diagnostic LEDs on the main logic board that can help you to troubleshoot the computer....

Chosen Solution the sim jacket of my phone is working but the holder has been damaged…. what i mean to say is the belt like thing which keeps the sim in place has become loose…. so it cant hold it…. will i require a new one or can this be repaired? from what i seem to comprehend is that mayb some screw which helped the holder to keep the sim in place has fallen off…....

Chosen Solution Hi, Its been a while since I bought a N9005 unit, and now I;m facing with a weird thing: My device tells me I have total amount of 1.424Gb RAM!!! it seems like I burned out exactly 1Gb of my RAM?! Im encountering some random restarts from time to time…so…I decided to fix this. 1-Is RAM of Galaxy Note 3 replacable? 2-Where is it exactly? 3-If its not replacable, what about the Chip?...

Chosen Solution My HP computer flashes red light and beeps 5 times stops then 5 more on and on ,this at start up will not start . I have unplugged hard drive, memory stick replaced CMOS battery,still not starting. I have a new hard drive and CD Drive, but they are not installed for the current problem. Any ideas . Computer is HP elite Desk. Thanks, Hi, What is the full model number of the desktop?...

Chosen Solution I cannot get the home charger into the slot - it will not go in Check for damage to the port and to the charger look for bent parts or dirt in the port or lint in the port

Chosen Solution When I remove old screen on iPad Pro 9.7 inch Update (03/09/2018) and what to know if EMI shield is fine ? You need to remove the EMI shield in order to isolate the battery prior to removing the Screen Assembly so that you don’t accidentally damage the backlight circuit. Check out this teardown.

Chosen Solution Need to unlock my iPhone or told how to master reset it. Please. Well, you should be able to take it to Apple, and they’ll just verify its yours, and then they’ll help you get inside

Chosen Solution Hi, I am not able to connect with my o2 cellular provider network. I can’t send messages or texts, but I can receive them. I have a Samsung galaxy note 3. Hope you are able to help me. Thank you! Update (11/23/2017) hi, thank you, I have a brand new sim card. Is there a way I can try and sort this out myself, before I talk to my provider?...

Chosen Solution So I recently replaced my old iPhone 7 screen since the ribbon cable snapped. And when I replaced the screen and booted it up it needed to charge. And the charging logo and everything was there so it seemed that everything was going perfect. But when I booted it up with it havin full battery I turn it on and see no apple logo and then the screen is then on for like one second....

Chosen Solution I have removed the 20 GIG Hard drive from my PowerBook. I want very much to copy the files off of it onto my MacBook Pro. What would I need to purchase to connect that 50 pin drive to some USB port and mount it ? Michaelejahn@gmail.com Hi Gabe, thank you so very much for trying to help me related to my problem reading data off of my Hard Drive that i removed from a dead Apple iBook....

Chosen Solution Hello! I’m trying to identify the third black strip when you first open the watch that isn’t a part of the display flex cable. I’m unsure if it’s just tape or a cable. Can someone help me identify what it is? Update (06/25/2022) The watch is currently taken apart to replace the display flex cable, but this is a photo of where it disconnected. Here’s a better picture of the display cables...

Chosen Solution I have a Murray riding lawnmower model 42516X92B and some body has stolen my ignition switch I have one from a different mower but can’t plug it in not the same prongs if any one can help me out sure would appreciate it thanks Hi @cherokee65 , Here’s a link to the service parts manual for your riding lawnmower. On p.4 of the manual there is a wiring diagram which shows the connections to the start switch (ignition switch?...

Chosen Solution Hi, I incidentally put 10v of voltage to pp batt vcc. After that i got pp_vcc_main and pp_batt_vcc short. Put some current to find shorted components and i found some heat on U0900. Take out U0900 and got a blown solder ball under U0900. U1202 also got shorted on Pp_vcc_main. Take out U1202. Pp_vcc_main short is gone. Before replace U1202 i checked pp_1v8_sdram. And that line also shorted to ground....

Chosen Solution So here’s what’s happening. I bought an iPhone 5C in the intent to repair it for a close relative. The phone was supposed to be completely dead, but i managed to bring back the apple logo somehow by doing nothing. I though that because the iPhone had no battery, I just had to buy one and everything would be fine. Guess I was wrong. The phone is still stucked inside of a boot loop....

Chosen Solution Hi guys. I wonder if you can help? My MacBook Pro 2.4 screen started going crazy with different colours and freezing and eventually just refused to boot up. It would give the initial buzz but no chime and then just sit with a black screen. The light where the front catch is would light dimly and go bright when I shut the lid and the fans and HD would run....

Chosen Solution have an iMac 21.5" the pins on lcd internal connector and removed some pins from the board while attempting to replace the hard drive. can someone help me? already use machine to stuck them but nothing.. only some light on lcd when i power on the imac.. also if i use second screen is ok.. i will post some photos to see.. Ouch! Looks like you pulled off the header plate from the main logic board with a few pins broken off with it....

Chosen Solution I replaced the digitizer on an iPad 3 Wifi (A1416) and since, have not been able to get it to boot. Hard reset has done nothing. After doing everything else I could think of, I built a new iPad 3 out of shop parts (all of which are confirmed working) essentially creating a completely new device around the logic board. Still nothing. I put a good logic board into the newly built iPad and it works without a hitch....

Chosen Solution I have an iPhone 13 with a damaged front camera. I haven’t been able to find anyone that has done this replacement and I haven’t worked on any 13’s yet. It looks like it’s a fairly straight forward swap with the caveat that face ID won’t work without some soldering being done. TBH I’m fine without having face ID. Can anyone confirm that it’s a simple part swap?...