Chosen Solution Laptop screen becoming detached from laptop itself. Internet cable came loose from touchscreen. Will not connect to wireless internet like it should. @iamsensei use this guide to teardown the laptop to the point you can reconnect the wires that have been disconnected https://www.youtube.com/watch?v=svHY2nOn… Hope this helps
Chosen Solution Hello ! my ipad is stuck in a boot loop, when I plug in the charger you can see the white screen with the black apple logo. nothing happens without a charger if you try to turn it on. One sees only briefly that the display goes on but it comes no apple logo, the screen remains black. I have already tried to put the ipad in the recovery mode, which works well....
Chosen Solution Hello, So I have fixed a few phones in the past. From iphone 3- 5s. The phone was dropped in drive and we ran over it. Could not turn it on. So I sat it on the bench for a month and was gonna use it for parts. But I felt brave and decided to do a refurbish. what a mistake. Bought a new Back Housing, New OEM battery, New Front OEM screen, New OEM charge dock connector, New screws....
Chosen Solution Hello Sorry for my English I am Spanish. As stated by my title my iphone does not work well and acontinuacion explain what happened to me. great to enjoy our quality iphone all submerged. I was not more than 1min water. Some water detected by the screen inside the case. Proceeded to remove it quickly. If you try to turn the terminal enters loop It turns on and off and the display goes red and blue....
Chosen Solution Now that replacement parts are beginning to become available I would like to know how I replace and troubleshoot my screen. I shattered my screen after owning it for two weeks. A local repair place replaced the screen but after a few weeks it has become clear that something is seriously wrong with the synaptics. Where would I begin to troubleshoot and how do I replace the screen if necessary?...
Chosen Solution I would like to attempt repair of a bulb that died after one year, and another that just flickers - but can’t figure out how to remove the top plastic part to get to the mainboard without damaging it. I was finally able to get through by slicing a utility knife around the seam with multiple passes, could probably be done more safely with a rotary tool. Careful not to go too deep there are a few things on the board that stick up past the seam....
Chosen Solution How is the force gasket attached on the bottom side? The gasket is held in place by adhesive. You’ll need to replace it if you’ve pulled off the screen assembly. Here’s a vid which shows the process: How to Replace the Display on an Apple Watch Series 2
Chosen Solution How much does it cost to fix my LG k7? Titiana, Ifixit does not do repairs on items, we offer advice/trouble shooting on how repairs are made through answer forum and parts and tool store offer some parts for purchase. You are best to check a local computer/cell repair shop for an estimate on repairing your LG K7. Go to the ifixit home page and browse through the headings to learn more about ifixit ....
Chosen Solution Hello, sorry in advance for my bad english but i’m french guy. Do you know how to change the SSD (& why not the RAM) on the Sony Vaio Duo 13 ? Thanks a lot I replaced the 128GB ssd with a crucial 240 ssd in a sony vaio duo 13 model svd13223. Here is a youtube slideshow of the order of disassembly. Be warned, as has been stated, the sticky mesh cover will not be reusable....
Chosen Solution There are some dead pixels on my screen and also a big scratch on the touchscreen. I’ve tried showing JScreenFix on the camera, but it needs a microSD card to use the camera and I don’t have one. If you have a solution, please tell me. Hi @thecollector , Sometimes dead pixels can be fixed by using different methods e.g. software, massaging the LCD screen over the dead pixel etc, but mostly not....
Chosen Solution i turn it on and all there is is a blank screen with a folder with a question mark. what should i do? Dig out the iMac Install CD that came with the computer, put the Install CD in the drive, and it should begin to boot off the CD. Once the computer has booted up from the CD, you’ll have access to a utility that will let you do some simple repairs to your hard drive - either Disk First Aid or Disk Utility, depending on the OS that came pre-installed on the iMac when it was new....
Chosen Solution not charging then when i try to open i push the power button nothing happen Hi, Have you proved that the power adapter is working? If you have a DMM (Digital Multimeter) or know someone who does, check that the output of the charger is 19V DC, when you connect the DMM, using the Voltmeter function, across the output lead. If there is no or low output from the adapter (use a known working wall outlet) then the charger is faulty and will need to be replaced....
Chosen Solution Whirlpool /Maytag washer model MTW5840TW0 works great, except on the drain and spin cycle. The drum starts to spin and the water drains. Once all the water has drained the drum goes out of balance and hits the cabinet. What could be the problem? I’m thinking its the suspension springs, but just by visual inspection they are not broken or rusty. There about 12 causes for this but it is usually a bearing....
Chosen Solution micro sd 2gb Update Its not formating :( me try 2 format wid my mobile but It asks password…. also tryd in card reader it nt showng If thats the case, it might just be a defective card. 2GB micro sd cards go for less then $10 online, and about $15 in stores, so unless you have vaulable data on it (which i assume you don’t since you want to re-format it) i would just replace it....
Chosen Solution I am unable to move apps despite having a app manager. It tells me to open app, go to storage and select move. Unfortunately, the only options shown are to stop app or clean cache. Please advise. Thanks Hi, As of Android 6, The BLU device also lets you format the Micro SD card as “Shared internal memory” . Anything earlier do not have this feature. Since only a handful of apps had the ‘move to storage’ feature enabled, this is your best strategy....
Chosen Solution I know that you cannot connect any external source to the iMac 21.5" to use its display. But the 27" mini displayport offers input so that you can connect, for example, your PS3 to it and use it as a display. My question is this: How do you replace your mini displayport on an iMac 21.5" with the mini displayport of an iMac 27" and would it accept input?...
Chosen Solution The place where you connect the usb type. C charger is damaged I have tried looking up videos on how to replace the piece, so far no luck. Is there any way this price can be replace, I will not be able to enjoy the nintendo switch until it is fixed. Thank you Yes, it’s fixable but it’s not easy if you don’t have soldering experience. The old one will need to be desoldered from the motherboard and the new one soldered on....
Chosen Solution Can replace the french keys with english ones? Yes, you’ll also want to set keyboard to english under Keyboard Preferences. If this answer was helpful please remember to return and mark it Accepted. If your talking of replacing the french keyboard with the US keyboard: NO, the french (AZERTY) keyboard and the US keyboard (QWERTY) have a different layout, The return key has a different shape so no you cannot swap the keyboards, you’ll have to replace the entire top case with an US one if you want the US layout....
Chosen Solution I have irreparably damaged the charging coil of my iphone X with a screwdriver in an attempt to replace the battery. Can i remove it and use the phone without? Thank you! Yes, you should be able to remove the coil and use the phone without wireless charging.
Chosen Solution See picture attached. It seems to be a blown transistor (as reece pointed out it is actually a capacitor) next to the Airport card. The machine works fine, but I feel the urge to replace it. What does it do and where do I buy a new one? The soldering job seems pretty straight forward. The identification seems to be “NEL AV7” or AY7. The schematics for this board is here....
