Chosen Solution Someone offered to sell me an iPhone 7 for $40. The WiFi is greyed out and the frame is bent. Is it fixable or is that a board level issue? Should I buy it? I think it’s worth the money in parts alone as the screen isn’t cracked. There’s no way to tell before opening up the phone and closely inspecting condition, but as you noticed yourself price is so low that it would be a good buy in any case....
Chosen Solution My husband’s waterproof Patagonia wind jacket has mesh on the inside of the jacket. The last time I washed it (on cold, delicate cycle), there were bits of blue mesh all over the washer. The mesh is deteriorating. Is this repairable? I’d go ask the oldest looking lady at a fabric store, one with lifetime of experience. She can probably not only tell you how to fix it but sell you what you need to do it....
Chosen Solution I have a MacBook Pro 13 (2014) in pristine condition. Never dropped it, zero dents or scratches. What I have noticed is that the lid is misaligned for some reason. It feels like it is it pushed to the left about 0.2-0.3 mm. It is barely noticeable but I can feel the misalignment on my fingertips. You can see it on the attached picture taken from the MagSafe side....
Chosen Solution My Furby is very angry because my brother kept feeding it toilet paper, how do I make it happy again? Hey Morgan, From what I have seen, it seems like gently petting/hugging it helps, as well as feeding it yummy food. In addition, playing loud music seemed to be the biggest fix. However, make sure you give it lots of attention after it becomes nice again, or else it will sleep, Hope this helps, -Tanner...
Chosen Solution battery drains fast want to replace it You can use this video on how to open the back cover of the Samsung Galaxy Note 10.1 (2014 edition) https://www.youtube.com/watch?v=jZvEFqYd… Make sure you turn off the tablet before doing this of course. Basically the back cover is held by some clips which are around the frame, two especially between the charger port (one left of charger port and one right of charger port)....
Chosen Solution Hello everyone. As in tittle. Now sometimes I can’t record my voice but after restart it works again. What damage I did? Quality of sound is still good. Have I punctured waterproof layer too? Huawei p30 pro It is supposed to be still fully IP68 rated, since the waterproof seals are not in the same line as the microphone hole. You can watch the disassembly video of JerryRigEverything on YouTube for reference....
Chosen Solution my mobile was working perfectly but i had broken touch screen so i replaced it but after replacing it I couldn’t start the phone i click on the power click and it starts but not continuing . I have android ice cream sandwich on my HTC HD2 mobile , so what is the answer for my case and thanks in advance for ur help Hi Rami. When you start up your device, what happens?...
Chosen Solution I need a firmware dump for A1418 M/B 820-3588-a anybody help me? If your system is running you can check your firmware and update it following this Apple TN: EFI and SMC firmware updates for Intel-based Macs. If your firmware is damaged you will need to replace the EFI EEPROM chip after you have burn’t it with a fresh image. If you bring your system in to an Apple Store they maybe able to fix it for you under extended warranty....
Chosen Solution Can you guide me in as to how to access to the power supply for the Brother HP-2170 W printer please?. Thanks Consumer grade printers aren’t exactly easy to service, and they are generally more expensive to repair then the cost of replacing the whole printer. While you can probably find the repair parts, they tend to be expensive. The cost of OEM drums leads to people dumping these printers over consumables, so my advice is to get one of these printers and reuse your current drum and toner (reset the drum counter if you need to, but see my warning in the caveats listed)....
Chosen Solution Might be buying a sony A7II very similar to A7rII. It has incompable battery error no matter which batteries you put in it. I heard it might have bad contact with batter terminals. Any thoughts on this please before I take the big gamble and buy it?? Thanks & have a Great day! @biznisdude , Brent Haynes, Is there any chance you could try and clean contacts and try camera before you buy....
Chosen Solution The device no longer boots on its own, and when I plug it in all I get is the Apple logo for 5-10 seconds, black screen, and the Apple logo again in a never ending loop. I figured the battery was dead and so I replaced it myself. However, even after the battery replacement, the issue still remains. Any ideas? Your problem could be related to a defective charging circuit....
Chosen Solution Hi guys i really need help im currently working on an iphone 5 again i accidentally stretched out the camera on the board While im removing the board i unscrew the camera bring it back on . After turning on the cam It goes black screen btw im fixing the power button thats why i open the board. I tried downloading flashlight and camera app it doesnt work and it said no flash detected on the phone while on camera app it just go straight to the front cam Is their a problem on the board ?...
Chosen Solution My iPhone 5 just wont charge no matter what charger or computer I use. But it syncs normally. Battery is fine, tried in a different phone. What might be the problem? UPDATE: I have switched the charging dock from a phone that works and the situation is the same: syncing to iTunes fine, lightning icon next to battery but no charging. Is it logic board? Can I just replace the part or the whole board....
Chosen Solution I got a new battery replaced on my iphone 6 Then I got back home and put the phone to charge then it charged up to 76% then I removed the charger. Then I used it till it died (till it came to 0%) It was night then I plugged my phone to the charger and slept I heard the sound of the charging which comes from the phone once you plug it Then I left the phone to charge and then got up in the morning and my phone was dead I tried putting it back on charge it didn’t work....
Chosen Solution Hi all, I took it on myself to replace the screen on my iPhone 7+. After installing the new screen, I noticed the following features no longer worked : front camera , ear speaker, vibrate on silent/ring, volume controls, phone speaker, and home button no longer clicked ( however, fingerprint functionality still worked). After multiple forums and post, I was able to pin point that the flex cable could be the culprit....
Chosen Solution My display screen has a splinter crack in it. The crack is dispersed enough that it doesn’t impede anything that’s displayed on the screen. I’m assuming this crack is what’s causing the touchscreen capabilities to stop working. Any help or insight would be appreciated. Hi , Here’s a link to the service manual for your laptop. Scroll to p.54 to view the necessary pre-requisite steps and then the procedure to remove/replace the display assembly....
Chosen Solution After getting primary noise from case i discovered my primary chain is loose what is the easiest way to adjust the primary chain ? skully ferguson, “you need to remove an inspection cover, which has a reusable rubber gasket. With the cover off and the transmission in neutral, you push up on the chain and measure how far the chain moves when you push up on it. For a big twin it should be 5/8 to 7/8 inch (16 - 22 mm) when the engine is cold, and for a Sportster it should be 3/8 to 1/2 inch (9....
Chosen Solution I have a customer’s MBA which got drunk one night recently on tequila and orange juice… Now it does not power on at all. Nothing. I found a page which shows how to jump start older machines, and have successfully used it’s tips on those machines. (http://www.insidemylaptop.com/turn-on-ma...). However, they don’t have one for the 2015 MBA, so I am asking iFixit community if anyone may know where to find the power-on pads for this model… It looks to be getting power from the charging port, as I see voltage on the battery, but not much… Maybe the problem is elsewhere, but I don’t have any schematics or diagrams to refer to… Can someone point me in the right direction?...
Chosen Solution I forgot that i wasnt leaving the back plate an started removing the shielding and ripped it how do i replace it and make the front camera work The copper shield isn’t really necessary for the screen assembly or front camera assembly. Is the front camera not working? Then you need to replace the front camera assembly. You can buy the replacement front camera from here: iPhone 5s/SE (1st Gen) Front Camera and Sensor Cable Guide to replace the part: iPhone 5s Front Facing Camera and Sensor Cable Replacement Optionally you can buy the copper shield and install it if you want: [linked product missing or disabled: IF124-025-1]
Chosen Solution I have a rival toaster oven similar to the one in the picture. I work in a cubicle area at work so everytime I turn it on the bell rings. Is there a way to turn unplug it or something so that the timer still works but the bell is silent.? Thanks Latrael Actually I just did this and it wasn’t too hard. New basic Black and Decker toaster oven that cost $40....
