Posts

Chosen Solution How To change Radiator honda accord lx 2001 junsamrong, here is what the manual says:" L4 with A/C Drain the engine coolant. Remove the upper and lower radiator hoses, and ATF cooler hoses. Disconnect the fan motor connectors. Remove the radiator upper brackets, then pull up the radiator. Remove the fan shroud assemblies and other parts from the radiator. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely....

Chosen Solution Could someone disassemble it? The battery life is in the 50% and i think will have to replace it in a few months. Hi, I fix it! Here is a picture from the inside of my T100 Chi for reference. The best way is with a plastic paper and a little solvent, introducing the paper by the corners and then advancing on the sides. Using heat is very difficult and tedious, progress detaching the screen is very slow....

Chosen Solution Today when I was on my pc I tried to use my mouse, but when I connected it to my pc I got “when placed in deep sleep mode, the system may not wake on LAN or through a USB device” is there a way to fix it? I already tried making a new plan on the Power section of the control panel! Hi @doo , Go to Control Panel > Device Manager > Mice and other pointing devices , right click on your mouse listing and select Properties > Power Management and ensure that the box labelled Allow the computer to turn off this device is unchecked and that the other box labelled Allow this device to wake the computer is checked and click OK

Chosen Solution Hi, i need to remove password for lenovo U410laptop i’ forgot . thank you! Removing the cmos battery or shorting cmos the jumpers will do the trick. Doesn’t look good for this model, according to the manual on page 46 (https://www.lenovo.com/shop/americas/con...): “If you forget your administrator password, a Lenovo authorized servicer cannot reset your password. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the system board replaced....

Chosen Solution I’ve got a 13" MBP with a badly cracked trackpad. I’ve purchased another trackpad (part #922-9014), but cannot find a tutorial or instructions on how to replace it. Any help/links are greatly appreciated as I need to repair it ASAP. Unfortunately, we don’t have any guides that demonstrate how to replace the glass track-pad itself; we do sell the track-pad as part of the Upper Case though. You can utilize the Upper Case guide which includes the track-pad....

Chosen Solution I need to replace the plastic ice guide that is an outside part of the ice dispenser on the front door on my Whirlpool refrigerator ED5NTQXKT00. I need to know how to remove the front cover (without breaking it) to access the ice guide. Does it pop off or slide up,down, sideways? Jacob, check on here and see if this looks familiar :) good luck with your ice….http://www.applianceaid.com/ken_whirl_di…...

Chosen Solution So My wife’s Mid-2012 MBP 15" just took a dump: (Previous thread) So after figuring out that the cost to repair this myself with the help of the people on this site was going to cost 50%or more of the cost of a new one, I’ve decided to buy another Mac. I just bought a brand new MBA 13". She is a photographer and had a lot of editing programs along with pictures on her MBP....

Chosen Solution I broke the part that closes the battery compartment. Is there anything that I can do to get a new one besides buy a whole new camera? I keep trying to super glue it back but that is not working. A few searches on ebay tell me that the battery cover is not available as a spare part. Also, I know from experience that gluing the parts back together won’t work....

Chosen Solution So, let me start out that this could be my fault and I might know that answer already. I fell asleep and my cat knocked my laptop from the table. It had the headphones in it and they got shmooshed inside the port (This was Months ago.), but after I got it out it still worked fine. The headphones worked and the mic on the head phones worked, But as of today the mic on the head phones stopped working, but it works on all other devices I have....

Chosen Solution i cannot open my other applications Try closing all the open applications. Double click the home button, this will bring up all the apps that are currently open on the dock. Click and hold on one of the apps until you see a red minus sign on all of the apps. Then close all the apps. Here is a video in case you get stuck: http://www.youtube.com/watch?v=-BpKelKli… Sometimes what happens is that people don’t know how to properly close apps and eventually they have so many apps open that the iOS device becomes super slow and then you start getting problems running the apps....

Chosen Solution I have an April Air 600. Approximately a 2005 model year. I have replaced the solenoid before about 3 years ago. I clean and replace the water panel every year. Last year when i changed to summer mode and removed the panel it didn’t have as much mineral deposits in it as it normally would. Didn’t think much of it at the time. When I went to start the system this session I had no water flo....

Chosen Solution Hello I’m trying to take my dell Dimension B10 back to factory settings can anyone please help me i am not having much luck… William, on the desktop all you have to do is to either reformat the drive and reinstall the OS and the drivers. You should use the Dell system disk that came with your computer. You can always do a clean Install using Dell OEM XP CD & Resource CD Check your hard drive for a partition that has the Dell restore file on it....

Chosen Solution A friend gave me an iMac 17" (Late 2006 CD) EMC: 2114 and it can’t start. I connected the power adapter and something sounds inside (like a clicking sound), then I pressed the power button and nothing happened. I opened it to check the diagnostics LEDs (It have 3 LEDs). When I connect the power adapter the #1 LED was on, when I pressed the power button the #2 LED turned on, but the #3 LED just blinked once....

Chosen Solution The phone cuts off after just five rings Hi @jimgray , Do you have a voicemail service for the phone number. If so, go to your phone provider’s website and search for how to extend the ring time before the calls get diverted to the voicemail service. The default setting for some phone companies is 20 seconds, but this can be incremented by 5 second intervals up to 60 seconds or more depending on the service provider

Chosen Solution so i installed the red ring of death kit then used a heat gun over it and when i turned it on i had e74 so i re did it and still e74 but b4 i installed it i didnt get e74 just rrod any help? Rrod can be several errors. In this case e74 is the graphic chip which is located behind the DVD drive. Go to www....

Chosen Solution Dear tech-people, my Ipad 4’s battery has reached 0% two days ago. As usual I attached it to the original charger (with non-original cable) but it would neither charge anything (just stay as in the attached picture) or boot. After inserting the cable and after pressing the power button the attached picture appears on the screen for two seconds but nothing else. It stayed on the charger for around 24h now without any changes....

Chosen Solution I have just upgraded my iPhone 5c to iOS 8.4 and my phone started acting wired its rebooting itself after 3-5 min when ever I am charging my phone and my battery usage is not being displayed properly it shows 100% all the time even after using it for 4-5 hrs. Recently I have also notice that when ever i shake my phone there is a strange sound coming out of my phone like something is dislodged in my phone....

Chosen Solution iPhone 6 the caller sometimes hears bad loud static when my iphone 6 is in speakerphone mode. Also, sometimes videos have bad loud static. Also, speach-to-text does not get recognized. First thing I’d try is a Front camera flex assembly that includes the microphone probably giving static noise..here’s the guide: iPhone 6 Front-Facing Camera and Sensor Cable Replacement

Chosen Solution Hi, there - Recently my iPhone 6 Plus’ screen died. There had been no previous damage to it (still looks new). Not having AppleCare or insurance through my cell phone carrier, I brought it to an independent repair shop who disconnected the screen, attached a cracked screen which still worked and I was able to use the phone. I ordered a replacement screen kit through a reputable vendor and followed the instructions disconnecting my screen and then connecting the new one....

Chosen Solution the pad U4500-D2 is missing can i run a jumper from C1 to make is work Yes, you can. You can also connect it to any ground point. Small micro-jumpers that are totally beneath the IC can be hard to work with because once you solder the IC in place, you have no way of knowing if the jumper stayed in place. With a jumper leaving the IC, you at least control one side of the jumper....