Posts

Chosen Solution One of the wheels of the Marathon FC9200 broke off. I bought a new one, but I don’t know how to attach it. There is an additional part (red) that is located in the axle, but I don’t know if you should put it in the whole and then attch teh wheel, or put it in the axle before attching the wheel to the cleaner. If I try to follow the secon possibility, I feel much resistance and am afraid that I will break either the wheel or the hole into which the wheel should be attached....

Chosen Solution I have 3 ipod minis partially disassembled but can not break the small Philips loose. I’m afraid of stripping the screws. Try putting a piece of shrink wrap tubing or a rubber band over the screwhead first. Otherwise, use a dremmel or file to cut a slot in the head, and use a flathead screwdriver.

Chosen Solution Good evening to you all, I made the change from a window iphone 6 plus and also the flex dock and also the earpiece and the microphone does not work, the room is new. I do not know what to think of the problem is. Check the microphone and earpiece gasket / filters, maybe they are clogged with dust, the hole right next to the earphone jack and the earpiece speaker filter....

Chosen Solution How can I reset My supersonic sc-8809 , I want it wiped clean, no stored info, passwords, brand new is how I want it. Can anyone please help with instructions on how to do this .?. Power off your Tablet. Press and hold Volume up and Power button at the same time until you boot into the Android system recovery. … Choose Wipe data/Factory Reset with your volume keys and then press the power button to confirm....

Chosen Solution How am i supposed to know what the ID and passwords are? How do i get in? Also is this normal? this is obviously not the “first use” if someone already input a login password… f you have no another administrator account in the system, you cannot sign in Windows to reset it. If your PC is on a domain, your system administrator must reset your password. If you’re using a Microsoft account, you can reset your password online....

Chosen Solution I have two partitions in my iMac, one with Windows 10 and another with OS X Mountain Lion. I need to run ArtiCad a software that only runs in windows and that is already installed. It was all pre-installed to boot on startup immediately in Windows ambient and now it just doesn’t boot at all. Only a white screen shows up. How can I solve this problem? Kind Regards, José Freire...

Chosen Solution I have 2 missing copper pads under pins 3 and 6 where my LVDS connector mounts to my logic board. I have seen some videos where folks run jumper wires when this happens. If this is the correct way to proceed I need help finding where they need to go. I have the schematic for my computer and have pictures with red ovals next to the relevant information....

Chosen Solution I am not sure if my computer is an EMC 2429 or Model A1312 and I am not sure where to find that information. I am seeking to replace the graphics card. The info I have is listed in the Question Title. Look on the bottom of the stand if it won’t boot up to look at “about this Mac”.. For full exact data use the serial number located on the stand and input it here: https://everymac....

Chosen Solution Power burner 2A (right front) does not adjust when knob is turned. Burner lights as do all other burners. Need instructions or video on how to replace the valve which I ordered. Here are a list of videos from youtube instructing valve replacement. https://www.youtube.com/results?search_q… Kenmore ranges are rebrands of other brands. Hopefully, one of these is similar to yours.

Chosen Solution Is there a way to have my 2004 F150 perform a self test on the Instrument Cluster? @ron_dav, Ronald, Instrument Cluster Diagnostics explained, for a more detailed explanation use the links below. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://www.f150online.com/forums/lightni… https://www.youtube.com/watch?v=uk0LRvQw… If your doing this to check what lights may or may not be on, just get a simple image on google and compare....

Chosen Solution My ’lower volume’ button doesn’t work properly. Pressing, nor holding the button down, will allow me to decrease volume. In order to increase volume, I have to hold the ‘raise volume’ button down, just pressing it won’t change the volume. To make things more complicated, this doesn’t happen all the time. If I restore it or sometimes when I turn it on after charging it, both volume buttons will work normally, for a time....

Chosen Solution It’s almost sure that the cause of they issues you’re encountering is the water that found its way into the phone. The rice trick is just a urban legend, it temporarily removes moisture but it doesn’t dispose of liquid residues on components and over time it’s almost sure your device will eventually break. Liquid damage on small complex electronics needs to be taken care with proper tools by pros who can bath the phone with ultrasonic and chemicals after removing the soldered metal shields....

Chosen Solution Hi, I really hope that you can help me. I have one of these for a long time now and the subwoofer stopped working. So I decided to pull the whole thing apart and discovered that something on the crossover board burned. It looks like the correct part (resistor, capacitor, ?) could do the trick. Any suggestions what it would be? Or does anyone know the data of the chassis?...

Chosen Solution My baby boy put my phone into a cup of soda and it won’t work? How do I know what’s wrong and how to fix it? Also opened it and stripped screws and broke off some of the metal contacts. How can I fix it at little cost? Hey Shawnda, sorry to hear about your phone’s soda problem—caffeine addiction is a serious problem among many of today’s phones. We don’t have a liquid damage troubleshooting guide specifically for the Evo 4G, but our iPhone Liquid damage guide might give you some ideas on what may be damaged inside your phone....

Chosen Solution My 2 and 3 year olds opened my disc tray and put crackers into it. I was wondering how to fix it. It obviously wont open and close properly and I, again obviously, wont place a disc into it. I was wondering how to fix this issue. I would open the case and remove the optical drive and clean it. Xbox 360 E CD Drive Replacement @justlost You can take out the Optical Drive with the iFixit guide I provided below, and you can disassemble the drive for cleaning with the other external guide I provided below....

Chosen Solution I don’t own the huawei P9 Lite yet. However I had a try in a phone shop recently and I couldn’t acces the emojis all one page. It would only put one as I pressed on it. You can always download another keyboard for the phone such as Gboard (Google Keyboard). You will be able to see all the available emoji’s similar to the way iPhone’s emoji’s are displayed....

Chosen Solution Hello, First, I’ll let you know. I am not a fixer, a hobbyist, or technologically savvy at all. I recently purchased a new front glass for the Galaxy S9 and the Iopener from IFIXIT and have followed all the steps to replace the front glass via their instruction page as well as their youtube channel. Things were off to a rough start with removing the back glass, but eventually, I got it....

Chosen Solution It’s a big 4 heating area induction stove made by (not sure) but out of warranty. Now, one of the stoves fails to work and I would like to fix it. I have totally zero experience with this type of issue, thus I would like to ask, how can I find help for that, say what keyword I should use to google or look up local phone book? what’s the most economic and trustworthy way to have it fixed, calling a company or finding an independent contractor or a third option?...

Chosen Solution Hello, I hope you can help me, because i tried almost everything i could find in google, here what happened by order : 1 - I was getting searching, so i though it would be fixed if i update. 2 - I updated it from 10.3.2 to 10.3.3 . 3 - In the middle of the updating process, iTunes displayed an error. 4 - iPhone switched to recovery mode automatically....

Chosen Solution When removing the DC-In Board I had to disconnect the keyboard cable. While putting everything back together, I cannot get these flex cable into the zif connector. I have now accidentally removed the metal on the zif connector end that fits into the zif connector. Is there a trick to this? I have tried to fix another MacBook Air and had a real difficult time inserting the flex cable into the zif connectors Any advice, tips or tricks would be great!...