Chosen Solution Hi guys! Thank you so much for advising me on my iPhone battery connector issue. While taking out the battery, I tore off the battery connector and 2 connector pads. I haven’t soldered before and was wondering what exactly I should do to fix this. I have a spare connector. I came to understand that the two connector pads that are gone are resistors and therefore could to be shorted?...
Chosen Solution PLSS.. HELP ME .. I have my iphone 5 sometimes when i open it, it keeps restarting but sometimes not ,when it is open after a few minutes it reboot itself and open again and after minutes it restarts again , over and over again… Either battery is faulty or the small caps right above the battery connector got pry damaged (Note that this only happens when the battery is unplugged)....
Chosen Solution Hi all, We have a water damaged 6s that draws no power when the battery is connected, our USB Ammeter shows that with the battery connected draws 0.00mA but when we disconnect the battery we get 0.04mA-0.07mA. It is a water damaged case and this has undergone a lot of ultrasonic cleansing. It did have a VCC_Main short on one of the (really) bad caps which has not been alleviated (I think a total of four caps, two of which weren’t even fully connected were removed)....
Chosen Solution The microphone on normal call stopped working, can only talk on call when using speaker phone Hi, There is plenty of videos on YouTube to dissasemble the blackberry Z10, it’s quite a easy phone. As for the part you need to replace, the bottom microphone, it looks like this when you have the phone open. This is held down by a bit of adhesive. And here is a link to a replacement part....
Chosen Solution Hello everyone, My girlfriend found a while ago this broken htc one m8. It’s been a long time since we had it and I figured I should try to repair it. 1/ Do you think it’s doable ? I’ve already done two screen replacements on a OnePlus One. 2/ If so, what parts should I buy ? Should I go for a simple LCD screen or should I go for a screen + frame that is a bit more expensive....
Chosen Solution Hello, I wanted to know how can I check what is the best polling rate for my computer and where can I check that? I want to know because I don’t really know what to put on this, thanks! –Yuval Yuval, not sure what OS you have. Check HERE for more info and some software to adjust your polling rate. Rememeber that windows by default limits USB update-rate, or polling rate to a mere 125hz(125 updates per second)....
Chosen Solution I am in the process of researching to what extent I can upgrade my Apple Refurbished 15” mid 2010 MacBook Pro with Model Identifier 7,1. My question arises because apparently there is no such thing as a 15” 7,1 model. I am guessing the refurbishment of my machine is the cause of this discrepancy. Processor: 2.66 GHz Intel Core 2 Duo Memory: 4 GB 1067 MHz DDR3 OSX 10....
Chosen Solution I have this phone that I’m repairing and I need to find the model number but the lcd is completely destroyed and I can’t see anything the only number that’s in the back of the phone is the IMEI. When I turn on the phone I can just barely see the “Samsung Galaxy A11” That’s how I know the phone model but I still need the model number. Is it possible to find the model number of this phone with the situation I’m currently in...
Chosen Solution I have an annoying bit of dust behind my screen (about the size of a grain of salt) and I want to get it out. Is there any easy way? I’ve tried lightly tapping the side to get it out and it wont. Thanks! The easy way is to have apple replace your phone. However, if you would like to try to remove it your self, look here. This dust thing appears to be a common issue and is due to the seals being faulty....
Chosen Solution I tried the printer to print on cardstock but it won’t feed the cardstock. Hi @macsba , Has it worked before on your printer? If you haven’t tried before then have you selected the correct media in printer preferences > paper quality > media settings area? If cardstock is not listed, select a type that is similar e.g index card or brochure etc, so that the printer is “expecting” thick paper Here is a list of the card sizes supported by your printer, when the cards are loaded into Tray 1....
Chosen Solution How do I retrieve a disc from non working 17” laptop? If the system is not powering up your only hope is to remove the optical drive and then take it apart enough to get the disk out. Her’e the guide you’ll need to follow MacBook Pro 17" Models A1151 A1212 A1229 and A1261 Optical Drive Replacement and then once out you can take the cover off and then carefully back-wind the feed roller so the disk can be removed....
Chosen Solution so right now my xbox 360 analog sticks are all suffering from the same problem is that the analog stick is loose and wont fix its self back to center it makes it really annoying in game that my character is moving ever so slightly off in to a direction. so my question is how can i fix a the loose analog stick? with out any solder or having to buy a new controller....
Chosen Solution how to replace iphone4 baterry? i ordered from her the battery for iphone4 with the screw drivers number P2 and PH00 with 2 plastic top remover.. i already open the top cover and about to remove my old battery. but i cant remove the screw attached to the old battery. do i have the wrong screw? how can i remove it. my screw is not twisting it..it is the one included with the battery....
Chosen Solution How to change heater core on a 2007 Equinox? Richard Hamilton, see if this will help:" Removal Procedure Drain the engine coolant. Refer to Draining and Filling Cooling System in Engine Cooling. Remove the heater outlet hose clamp from the heater core. Remove the heater outlet hose from the heater core. Remove the heater inlet hose clamp from the heater core. Remove the heater inlet hose from the heater core....
Chosen Solution This printer was relatively inexpensive and is great for documents in Black & White. Quick, efficient and cheap to operate. How do I disassemble it to clean the mechanics to get a cleaner printout ? You could try to clean the print-cartridge area as well as to clean the device paper path if you are experiencing toner specks or dots on the printouts. you might also try to clean the pickup roller....
Chosen Solution When I turn my laptop on it sends me to a black screen with white letters that say " Windows failed to start. A recent hardware or software change might be the cause. If windows files have been damaged or configured incorrectly, startup repair can help diagnose and fix the problem. If power was interrupted during startup, choose start Windows normally." Then it gives me two choices to either start Windows normally or launch startup repair....
Chosen Solution When I plug my watch in to my computer, I cant get my computer to connect. I have had my watch for a while, maybe it is just too old? To start tackling your problem we have to make sure the Nike Plus Program is installed correctly on the computer. First you will need to download the program from [Nike Plus Connect] , after that just run through the installer to get a fresh copy of the program on your computer and then try connecting the band again....
Chosen Solution I was replacing the battery on a 30gb ipod video, and it seemed to go well, except that the back is not completely holding in one corner. I assume I over flexed that part when separating the front and back. Any suggestions on how to improve the fit?
Chosen Solution The laptop won’t power on when it’s not plugged in, and immediately shuts off when unplugged. Almost as though it doesn’t even have a battery installed. Update (04/03/2021) Image from CoconutBattery Here’s another screenshot Sorry, you’ll need to contact the iFixit store for a battery exchange.
Chosen Solution lost my contacts and email icons. How do I get them back? @rbsz , R Bonasera, You can try this before a hard reset, you can reset your home screen in Settings>General>Reset>Reset Home Screen Layout. Contacts and email icons will still be there probably, but may have got accidentally moved to another folder/file, so you could also search through your phone, find them and drag them back to home....
