Chosen Solution hi, i got an iPhone 5 with a little problem. if i plug it in the charger, it charges normallyi. f i leave the phone in standby, it takes about 2 hours to fully charge. normal but if i use it while charging, sometimes it charger 2 to 5 % and then stops until you let it sit for 3 minutes and the same thing happens. it just doesn’t charge when you use it....
Chosen Solution Some months ago I noticed the bottom left part of my phone’s screen was lifted up a bit. I had dropped the phone on a wooden surface once some time before that, but when i picked it up at that time I didn’t notice any damage, so I’m not sure that was the initial cause. As time passes however I see the screen lifting up more and more, right now the bottom left part is considerably lifted up and it has extended to the top left part of the screen....
Chosen Solution Hello everyone, this is my first post and I’ve always read other guides on here, but I thought I should make an account because I really need help! Basically, I bought a second hand iPhone 5s, everything worked apart from the housing was fairly scuffed up. So I ordered a blue metal allot housing replacement from China which cost me £30. I work with phones every week and do screen repairs for friends and family, so I know a little bit about what I do....
Chosen Solution Hi, since recently i have got a problem with my iPhone 6. The problem is that my cellular is really bad, and does drop a lot, it is a bit like the iPhone cannot connect with Service. Other times it does not even connect and say: searching, or no service. Another thing is that it get’s really hot when the phone is connected to cellular, if i put it in airplane mode with wifi and bluetooth, everything is fine....
Chosen Solution Hello, I got an iPhone 6 which is working perfectly except 1 thing. It’s not loading/charging the battery. The weird thing is everything looks and works fine. You can connect it via USB, it’s getting recognized. It’s even showing this little flash next to the little battery display when the cable is plugged in. And the “USB gong” also appears. But it’s only holding the current percentage of power....
Chosen Solution I replaced the complete part for the volume and mute button thinking it would work fine but now the phone is umresponsive. It is seen on itunes and i restored it but still nothing on the lcd. Eve put the button back to original and tried a different lcd did the power and homebutton hold for 30 seconds and no response. Does anyone have any advice im in a pinch...
Chosen Solution My speakers on my hp elitebook 8440p have blown and im just curious on how to replace them. Austin, get your service manual from here. Page 93 will show you how to remove the speakers. Hope this helps, good luck.
Chosen Solution I recently replaced the left fan in my Macbook Pro A1260. The repair seemed to go well but according to the Istat Pro widget the new left fan is not operational. It shows that the left fan is at zero rpms(I.E. not working) All other features that were disconnected and reconnected during the process are working well. Does anyone have trouble shooting tips for me? Thanks Try connecting the fan to the right output port to see if it is operational....
Chosen Solution The screws are stripped at the bottom of my iphone 4…how do you get them out??? :/ I use this extractor set: Precision Screw Extractor Set if your good with power tools a Dremel is what i used to cut a slot in it for a flat head You can try this but i must warn you to be VERY CAUTIOUS in what you are doing. I used this method and it was successful for me, but then again, it was a small screw....
Chosen Solution After my headset is plugged in, error 108 appears on the screen. I tried to restart the headset and the red light started to blink on the headset. Do you have any alternative fix for this problem? Try to reboot your headset or restart the computer. If the problem persists, the cables may be the cause. Refer to the Troubleshooting Page for further instructions. Just reinstall you drive get the Geo graphic drive I had this same issue and it fixed it....
Chosen Solution Dear Armando, Have been following up your threads because I want to install PCI-e SSD for iMac 14.1 (Late 2013). My iMac was configured as 1 Tb HDD originally. Would be very grateful if you could answer two questions since I am still confused after reading the posts. Can I install PCI-e SSD on iMac 14.1 and still continue using my 1Tb HDD in its own place.? 2)You have mentioned that samsung blade models MZ JPU512T/OA6 (512GB) and MZ JPU256T/OA6 (256GB) will suit....
Chosen Solution Loose Charge port on Apple Mac Book Pro It sounds like the mounting screws internally have loosed up. But without some guidance on which model you have I can’t offer you more. Are you up to fixing your own system here? Do you have the needed tools? You may want to start there. Update OK, Follow this IFIXIT guide: MacBook Pro 13" Unibody Mid 2009 DC-In Board Replacement upto Step 2, then look where the MagSafe connector is you should see two screws which holds the connector block (DC-In board)....
Chosen Solution Hi there I’ve got this Samsung UE46F5500AW TV, but I don’t have any channels, so everytime I turn it on, I have to manually change the TV to the box (HDMI 1). Is there a way to boot the TV directly in the HDMI for the box? Thanks Note: The part “I don’t have any channels” is not the issue. I just want to find a way to boot up directly in HDMI 1 instead of TV (source of input)...
Chosen Solution Hi, I would like to replace the coil for the problem of the screens backlight in the 3GS. To access it i must remove the protective metal (shield) on the motherboard. Except I do not see how to remove it. Link to the shield What tools are required to do this and there is a site that explains how to replace? Thank you in advance for your answers....
Chosen Solution While hiking in Costa Rica past week, wearing my Patagonia down jacket, I got about two inch tear on the jacket near the shoulder by a thorn. The jacket is only a month old. Is there any fix I can do that will preserve the aesthetics? Thanks a bunch. Pete Here’s the guide: Patch a Patagonia Down Jacket with Repair Tape Hey Peter, I have a 17 year old down jacket (it’s a Marmot, but same construction as Patagonia) and it has a few repairs that are over 10 years old and still holding strong....
Chosen Solution how to replace alternator nepplpaul, you forgot to tell us what engine you need the information for. Here is the info for 4 cyl from here: “Disconnect negative battery cable. Remove the air cleaner resonator. Remove the drive belt. Remove the radiator inlet hose. Disconnect the engine wiring harness electrical connector from the alternator. Reposition the engine wiring harness lead rubber boot. Remove the engine wiring harness terminal lead to alternator nut....
Chosen Solution Hello, I recently found my nook but realized I forgot the passcode. Is there any way to recover it/reset it/disable it without restoring the entire nook to factory settings? This was covered in a previous question. I forgot my password
Chosen Solution is there a way to calibrate the fuel injection unit without the CO gas meter. W123 with 115 engine using CIS does require CO meter for proper adjustment. North American version vehicles typically have catalyst installed, so be sure mixture is not too rich (excessive unburned fuel will damage catalyst). Depending on service performed, maintenance versus fuel distributor replacement, adjustment should not require more than 1/2-turn movement for original fuel distributor....
Chosen Solution I was talking on the phone while using the toilet, and I accidentally dropped it in the bowl. The phone no longer works. Is it possible to get the phone repaired? I don’t want to buy an entire new set. If the phone is water damaged, it can be repaired. See the liquid damage section on page 14 of the user’s guide for more information. If that does not work, a replacement handset can be ordered by clicking here or by calling the Uniden parts department at 800-554-3988....
Chosen Solution I keep getting oil in my spark plugs and I’ve already replaced the valve cover and gasket. How can I fix this? Hi @noremac168 , Is there blue smoke coming from the exhaust? This link gives some of the reasons for oil in the spark plug well. (scroll down to the Common reasons for this to happen: paragraph)
