Chosen Solution Hey! I have an iPhone 7 with no service issue. I am a micro-soldering technician but I am new to it. The iPhone does not show IMEI and putting a sim card into the sim port does not change or affect the status. I am wondering if I should start at the baseband or the Qualcomm chip that I hear normally fails. Thanks for your answers and I hope you have a great day!...
Chosen Solution My phone hangs after housing change on the Apple logo, then comes a black screen, with a line, see picture, and this is repeated again and again. Tried to restore the phone in recovery mode on iTunes, unfortunately without success. As soon as the restoration is almost finished and the message about Itunes comes “Please do not break the connection to the phone”. Cancels everything by itself, and then it repeats itself all over again....
Chosen Solution How to do i up upgrade the storage and get into the back case of the laptop Hi, You cannot upgrade the storage in the laptop as there is no provision to do so. The laptop has 64GB of eMMC storage which is hard mounted on the systemboard. There are no other options available internally on the motherboard for any additional storage. The only option to increase storage is to connect an external USB drive to one of the USB ports and configure it as the storage drive for your data, leaving the onboard storage for the OS and programs only....
Chosen Solution Trying to take the Jabra Speak 710 apart. I see screws on the underlip of the device, but can not access these screws. Has anyone taken this device apart? Or something similar that could help? Thanks! I also ended up here as I had a set of batteries die (and puff up). The original batteries are made by Synergy Taiwan under their Advanced Hybrid line (AHB). Original batteries are part # AHB682828 - 2....
Chosen Solution I can’t remove the heat sink, I feel like I might break it by lifting up each end too high. I unscrewed the 2 screws on both ends but I feel like I can’t remove it without breaking it. I don’t see any other screws unless it’s beneath the black covers on the heat sink by I can’t remove that either. Thank you. Step #8, second picture shows the heat sink removed....
Chosen Solution Heater doesn’t dry the CLOthing. First check this: Cause 1 Thermal Fuse The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good....
Chosen Solution Hello, I recently replaced the keyboard in my Macbook A1466. While pulling the keyboard ribbon cable from the ribbon cable connector, which is stuck behind the trackpad, two pins broke. When I now plug in the new keyboard, some buttons (ctrl, alt) don’t work. Is it possible to change the ribbon connector? And where can I get it from? Has this kind of ribbon connector a special name? There are screws, so I suppose it is meant to be exchanged....
Chosen Solution the date time memory battery DAve Nelson I recognize this is an old question. This answer is just in case somebody still has this camera and wants to change the RTC battery. The battery part number is 1-756-710-12. It is located on the flex cable below the flash capacitor. Use this guide Sony Cyber-Shot DSC-W330 Circuit Board Replacement to get to it. Step 7 in this guide shows the battery....
Chosen Solution I am trying to repair my macbook pro. I bought this knowing that the LVDS cable was cut, I replaced it and I have no backlight now. I understand that it could be the fuse or the LEd screen, I am wondering if there is any way to tell which it is without taking it to a computer shop? Thank you for your help. its most likely the backlighting fuse, or its possible that the LED driver may have taken damage when the cable was broke....
Chosen Solution Hi all, I have late 2013 MBP Retina 13" which had some water spill on the keyboard. it still runs fine and everything works fine however it shows an x in the battery indicator, it no longer registers a battery at all. I tried resetting SMC and have taken the laptop apart to check the extent of the damage. both the battery circuit board and the logic board showed early signs of corrosion which i cleaned up with contact cleaner and a toothbrush....
Chosen Solution Hello, I have a Hp Envy x2 detachable 12-e0xx laptop/tablet and I was wondering if it is possible to upgrade its ram from 4gb to 8 and If it is possible to upgrade the storage on it besides using an micro sd card. Thanks! Hi Matt, No, unfortunately you can not upgrade the memory to 8 GB. The ram is already soldered on the board. Attention, this model is not easy to open....
Chosen Solution Hi there i have a side by side GE model GSML6REZCFGB LCD model in the instruction book it tells me to press enter after setting the temperature i can’t find the enter button can you advice thanks Ben Bendeman, you can try the temperature button. Enter the temperature you want, 0* for freezer and 36* for fresh food is ideal. After you enter the temperature then hit temp again....
Chosen Solution Okay, so I fixed an ipod that had water damage and everything worked great except for the speakers/headphones, they would work sometimes and then shut off unless plugged into the computer, then they worked fine. So I opened it up and found corrosion around the speaker area, cleaned it all up with 70% isopropyl rubbing alcohol, put it back together doing a thorough check to make sure everything was connected, and now it won’t power on or or connect to the computer....
Chosen Solution I have a fingerprint scanner,but for some reason I placed my thumb after the shower when it was kind of wet and locked me out.The idiotic part is I sort of forgot my backup password…how do I get back in without clearing personal data. If you have already registered your Samsung Note 5 with Samsung, using the “Remote Controls” feature on your Samsung Galaxy will allow you to use Samsung’s Find My Mobile service....
Chosen Solution So I want to get into microsoldering, just basic things. Long story short, will this soldering station be fine? https://eustore.ifixit.com/en/Tools/Sold… It looks like a decent quality soldering station (I haven’t used one though, just going on appearances). However, you will not be able to do a lot of micro-soldering with this setup as the tips are just too big. It will be fine for “soldering” through hole components. Fo “micro-soldering”, you need smaller tips or preferably micro-tweezers so that you can heat both sides of the smaller SMD components....
Chosen Solution Got this Satellite C655D from a friend to make room in his place but it has no os. Steps or pointed in the right direction would be nice. Is there a windows key on the Laptop if there is it will be on the bottom If not and you want a legit copy you will need to buy the OS of your choice . If your not so inclined to buy a key and copy you can always look at a less than legal route with Daz ....
Chosen Solution Hello, How do I fix my Iomega External Storage? It does not turn on, so I can use it. Thank you so much. June Test the output on the power supply with a multimeter to see if it’s getting power.
Chosen Solution Hi everyone My iPad Air 2 battery got weak, and my volume down button stopped working. So I bought: New battery $19.50 New volume-microphone flex cable $4.00 Pre cut adhesive strips $4.50 Installed everything with utmost care. Unfortunately I forgot to reinstall the plate that secures the cables connecting the LCD to the iPad. So I reopened the iPad, this time foolishly a tad less careful, so I ended up breaking my LCD screen....
Chosen Solution Hello. I have iPhone 6, a few weeks ago i’ve decided to change charging port, because charging every day was more difficult and cleaning was not helpful. I bought one on marketplace. When i’ve changed it, i noticed, that signal is very poor and sometimes was no service, and baterry was dripping very fast. On original port it was okay, when i’ve change it again. I bought another one, and i had the same problem....
Chosen Solution So a family member gave me an iPhone 7 to repair and upon inspection the screen had popped out, this was due to the battery which had expanded. Turning on the phone it appeared to work but it was constantly booting to the app logo, then a few seconds later a black screen would appear followed by the Apple logo again. Ive since tried 3 new batteries and also used different screens but still the issue remains....
