Chosen Solution When i connect the camera to the t.v. No images are being displayed It could be that your camera is not in the right mode, consider changing it to video mode in the set up menu or the memory card contains to images. Refer to guide ’ ’ for removal of the memory card and view images from internal memory.
Chosen Solution I have an iPhone 5 with Version 10.2.1. I have deleted all photos and videos and emptied the Recently Deleted folder and yet the Storage display shows Used 3.98 GB Available 1.1 GB For Photos and Camera it shows 921.5 MB usage even though all photos and videos have been purged. Furthermore, if I add up memory usage for all applications listed, it only totals 1.57 GB. Take away the 921....
Chosen Solution If anyone is still watching this thread, I was able to get the firmware update to run on my early 2009 Quad Core machine. However sierra seems to have hung on install at point of “installing on MacPro HD”. It’s been at 33 minutes for quite some time and in looking at the log there have been a number of errors reported. Not 100% sure if I should let it keep running, or click restart and see what happens....
Chosen Solution I recently repaired my first iPad digitizer. The part I ordered was said to be OEM grade. Following the repair the device seemed to work fine. After around 5-10 minutes of use it would shut off and reboot. Tried hard reset, restore, and even some random work arounds that were recommend to me. After restoring I was able to use the device for several minutes and didn’t have any issue....
Chosen Solution I have an iPhone 5 16 GB and a couple of days ago I replaced the battery Because before, the battery it had couldn’t hold a charge and you weren’t able to turn on the phone and today I replaced the screen and put everything back together. After installing the new battery I noticed that it randomly shuts off with plenty of battery life and reboots when it’s not connected to power but when it’s connected everything works as it should....
Chosen Solution I bought a battery and screen from third party store and without any help I try to fix on my own. While removing the battery connector from motherBoard i use a metal twister to pull out the connector. In doing so i saw a spark maybe because of touching the metal rail (like square shape)on the logic board. After fitting everything back I cannot turn back my iphone. The screen goes blank....
Chosen Solution Hye I got an IPhone 5s sent in to me regarding No Power issue. After I probing around, the phone showing a low resistance on VCC_Main and have a short on the same line. After remove the Wifi IC, the short are completely gone and I think it solved the issue. Also the phone booted up normally (Without Wifi IC). But after a few minutes the phone suddenly turn into Blue Screen and reboot automatically....
Chosen Solution Hi all! After replacing my iphone 6 (no plus) screen, the flash stopped working. It does not work either in torch mode or in photo / video mode. The rear camera works well. When the torch button is pressed, the flash flashes for a few moments, as in this video (https://www.youtube.com/watch?v=KqxVgYUj...). I recently replaced the flash but still have the same problem. Solutions? Thanks in advance. If you have already tried Scott’s suggestion, then your problem is on the logic board....
Chosen Solution Hi, I’m trying to repair my iphone 6. Recently I decided to fix my old iphone and resell it, I opened it I could smell the chemicals from the battery I removed carefully and yep the battery was pierced but surprisingly still working I removed it and kinda forgot abt the whole thing. When I finally ordered a new screen and a new battery and turned it on i just got the backlight on, I triple checked the connectors and brushed gently to clean them but still just the backlight....
Chosen Solution The display doesn’t show. I can infer that the touch is operable on it due to sounds and vibrations. I replaced an old cracked screen with what appears to be a genuine apple replacement screen. I’ve done this before with other phones of the same model and it doesn’t do it then. Maybe the connectors on the motherboard aren’t good anymore? I hope not, that’s incredibly hard to fix....
Chosen Solution I have an iPhone 6 that suffered water damage, and whenever I tr to restore it, I get iTunes error (-1). After doing some research, I found that it’s an hardware issue with the baseband chip(please correct me if I’m wrong). Anyways, how would I go about removing the shields on the logic board without a heat gun? I already have a soldering kit handy, and I’m not willing to go out and get a heat gun....
Chosen Solution Im planning on following this guide to replace my usb daughterboard. when im reassembling the device, do i just apply tesa tape to the outer edges of the phone, and maybe a couple strips on top of the daughterboard cover? i just dont want to place it in the wrong place and risk damaging something should i need to reopen the phone again
Chosen Solution I was in a job when I start to use iCloud. And used my official e-mail as apple id and iCloud id. After I resign from there, now I want to change it but do not know how. Ca you please help me? Review this Apple T/N: Change iCloud account information. But before you do you should make a backup onto an external drive of anything you have stored in the iCloud account....
Chosen Solution When I open my laptop this message Fan error appear firstly then the laptop is shut down Had same error earlier, No need to take laptop apart . Simply blow air from you’re mouth into the left side where the fan exhaust is. Could hear the fan moving and dust came out of laptop. Just blow very hard into it, worked for me. Mena Adel, sounds like a bad fan....
Chosen Solution Can anyone draw how the battery connector contacts? I can not make out the camera to see how the connector works. So I want to ask, when you press the battery on the contacts in the camera, the contacts move down, as shown in the picture. The fact is that the camera only works when I press and hold my finger on the battery. I press the battery inside the camera....
Chosen Solution I have a Apple A1010 laptop that when you turn it on, it chimes and goes to grey screen and doesn’t do anything. It is not the hard drive or the memory because I tested them in another laptop. I guess you tried all usual troubleshooting stuff like reset the pram, reset the PMU, boot from external source, boot in single user mode, fsck scan, connect the PB to an external monitor, etc ?...
Chosen Solution Car is losing antifreeze and there no signs of leak under the car. Just replaced thermostat. I was told it could be going into motor, what does that mean and how do I know? Check your lower radiator hose from the radiator to the engine. There might be a small leak that is dripping coolant without you noticing. Also check the thermostat housing, which can crack and develop a small leak that can evaporate before you even notice drips, etc....
Chosen Solution Hello, Last week I wanted to Eject my hard drive from my MacBook, but I accidentally choose to Burn the hard drive instead of Eject. Therefore, the hard drive did not show again. So is there any way i can get it back? Thank you. Update (07/15/2016) Thankfully I was able to get my hard disk back but all of the data have been deleted :( And I am now trying iSkysoft Data Recovery, but I am not sure if this will help me get my data back or not....
Chosen Solution I purchased your 5s battery and the install was going well until I tried plugging new battery into phone. The new battery size is the same as my iPhone model A1533 battery ,but the plug on the cable is larger than existing (female end) on my phone. Any suggestion would be appreciated. Or did I purchase the wrong battery? David Jefferson CDJefferson10@gmail.com The iPhone 5 battery connector is a lot larger than the 5S so it would look like you ordered or received the wrong model battery....
Chosen Solution Hello guys! I have an iMac A1312 27" It was working properly but NOW it turns on make the Apple CHIME. but SCREEN is totally DEAD (NO VIDEO). At first I tought it was the POWER SUPPLY for the LCD. I changed it with a brand new ONE. NOTHING HAPPENED. Then I started to think that it is related to the connector on the logic board and I am thinking right now to REFLOW it....
