Chosen Solution My iphone 8 with iOS 13.3.1 has a broken screen and I cannot swipe to shutdown the phone. There literally are no valid steps on the internet to shutdown an iphone 8 using only the hardware buttons. The only thing I can find is the steps to hard reset, which is not valid as it causes the phone to turn back on immediately. How can I shut down the phone before beginning the screen replacement repair?...
Chosen Solution I got a 4411 whats that mean? Maurice Aburame 0011 over heating - If you are receiving this error after disassembling your console make sure to all 8 of the heatsink screws are tightened securely to the board/heatsink holes. This error appears when the CPU overheats. The heat can’t be dissipated to the heatsink and/or the heatsink isnt cooled properly. This can be caused by improper thermal compound usage or if the error comes up instantly while booting the console, the heatsink will likely not be making any contact at all with the chip....
Chosen Solution I cloud backup message is locking my screen to use ipad I cannot able to do anything on this screen evenpressing on it to bypass this message or go away and use ipad. The following message is coming This ipad hasn’t been backed up in 15weeks. backups happen when this ipad is plugged in, locked and connected to wi-fi. What can I do remove this and use ipad...
Chosen Solution Sorry I know this might be a stupid question, but now I will go for it :) I have the new iMac 2019 3,0 GHz, and it is maxed with ram 32 GB…….what will happen if I despite all warnings from Apple upgrades to 64gb ram - would it work, or will I just kill my Mac? I’ve read that there is a ram making company that can make it work, but I don’t know if it’s fake news....
Chosen Solution I have a Late 2009 15" MacBook pro running El Capitan with a 1T hard drive, I want to put this hard drive in my 13" Mid 2012, which only came with a 500GB Hard drive. I have a bunch of external drives just in case I need to spread all the data to other drives and then clone the 500GB drive to 1TB, then put the 1TB drive into the 13" computer....
Chosen Solution So, I bought a Macbook Pro 13 (non-retina) Mid 2012 i5. It was sold to me as needing a OS reinstall and possibly a new HDD. Turns out the HDD was fine - but I reinstalled the OS anyway on SSD, it’s now running El Capitan. When the computer works, it works fine. The problem is that sometimes, quite randomly in my opinion, some temperature sensors on the Macbook go crazy, showing 128C....
Chosen Solution My hisense 40h5b tvs internal speakers are not working. They were working just fine until i plugged in speaker system to the audio out. The TV plays thru the speaker system but now when i pull out the cord, the TV does not play anything. I am assuming that the internal speakers are some how disabled but i can not figure out how to re-enable them. I have gone thru all the menu settings and tried turning them on there, resetting to factory settings and even resetting all settings to default....
Chosen Solution Can I use an iPhone 4 battery in an iPhone 4s ? Thanks! Unfortunately the simple answer is no. The iPhones 4’s battery has a different voltage and the connector is slightly different. If you need a new battery you can get one from here, iPhone 4S Battery that will work no problem in your phone. Hope this helps. Batteries are different physical size as well. The 4 is bigger than the 4s....
Chosen Solution When i the screen is lifted it has display but when i put it in place it suddenly goes all black .but it has sounds and the touch is working im hearing a sound on my touches .what is the possible problem need help pls General iPhone 5 troubleshooting steps: New screen? Are you needing to force the screen in? You may want to check the iPhone 5 metal housing frame for dents especially in corners that impede the screen from being put on properly....
Chosen Solution My dad has this iPhone 5S that had been water damaged for a long time. I cleaned all the parts with 90% isopropyl alcohol. When I boot up the phone, the dead battery logo shows up, then the apple logo and then a black screen until I unplug it, it stops working. What’s the issue? Also I tried unplugging the battery port from the motherboard then charging it and booting it, but it still doesn’t work....
Chosen Solution Hello my iPhone 6 is boot looping and sometimes showing a red screen for about a second. What I’ve tried so far: booting phone with front camera assembly disconnectedbooting phone with battery disconnectedreplacing front camera assembly with a brand new onebooting with home button disconnectedbooting with screen + home button + front camera assembly disconnected (iTunes will not detect the phone, PC will not detect the phone, assuming it was still boot looping) I’m not sure what to try anymore....
Chosen Solution I have a 1999 Suzuki Vitara 4 cylinder 2.0. Where are the spark plugs? And do you need a special tool to remove them? kim ochman, here are a few images that might help, as well as what the manual says about replacing the plugs. You first have to remove the ignition coil assembly. IGNITION COIL ASSEMBLY (IGNITER AND IGNITION COIL) REMOVAL Disconnect ignition coil coupler. Disconnect high-tension cord from ignition coil assembly....
Chosen Solution Skip to the end if you wanna see the real issue, the beginning is just the backstory* Approximately 32 hours ago i dropped a quarter of a glass of water on my macbook’s keyboard. i know the drill. Unplug from power and turn off instantly and drain the laptop while its flipped. Instantly i rushed home but couldn’t find my pentalobe screws so i had to wait 12 hrs until shops were open again to get one....
Chosen Solution How can I check if the fan is working on my MacBook Pro. I would download a temperature & fan monitoring app like Temperature Gauge. Pro that should give you the needed insight.
Chosen Solution About a week ago my wife dropped her Honor 6A on a water bowl. She removed the phone immediately (according to her it was like a couple of seconds) and, as the phone still worked ok, she just cleaned it off with a cloth and continued using it the whole day. After a couple of hours the phone started behaving strangely. In the evening when she came home and showed me the phone the touch screen wasn’t really working (just sometimes for a little moment) and i turned the phone off....
Chosen Solution Hello there! I have a Lenovo Thinkpad E580 laptop. And unfortunately the microSD card slot has some issues. I am fairly sure the spring inside doesnt work properly because when i insert the microSD card it pops out right back. The reader doesnt have a problem though because if i prevent microSD card from popping out with my finger behind, device reads it with no problem. FYI device’s warranty is expired....
Chosen Solution I’m planning to Reapply the thermal paste And am willing to cut holes in the bottom caseAnd glue on some mesh, And I have no optical drive. Update 5/15/2022: If you take the optical drive out you need to block the slot! As you don’t want air or dirt to enter though it. I would frankly leave the optical drive in place unless you replaced it with the special drive carrier to mount a second drive....
Chosen Solution Hi, I have an external USB hard drive that was initially formatted as Mac OS Extended (Journaled). It was accidentally erased (using Disk utility) and then again re-formatted to HFS. The hard drive has not been used since (other than to try and recover the data using various tools), so no new data was been written to it. Can anybody suggest any methods or software that could be used to recover the data from my external HD?...
Chosen Solution my laptop toshiba satellite pro l450d 12x .. i forgot the passward , how to reset it.. Here is a link to an article that may help you. Make sure you save the password if you reset it. Good luck http://www.technibble.com/how-to-bypass-… Things are not that simple. removing the CMOS battery to reset the BIOS may have worked in some old laptops. But not in any later or current model Toshiba Satellites....
Chosen Solution How do I replace the steering dampers? The W123 has a single steering damper. It is simply held in place by a single bolt on either end. Jack up the front of the car and place it safely on jack stands. Unbolt the old steering damper, remove it, put the new one in its place and bolt it down.
