Posts

Chosen Solution can u use any samsung galaxy s6 edge replacement screen for g928c model I would recommend you get a service technician to replace the screen however any screen that is supported by the Galaxy S6 Edge+ would work as expected You can buy a replacement screen below. I also included a tutorial on how to replace the screen too. Galaxy S6 Edge+ Screen Samsung Galaxy S6 Edge+ Display Replacement However, if you are not 100% confident with replacing the screen I suggest you take your phone into a local repair shop and have a professional handle it for you....

Chosen Solution I successfully replaced the full display. After reassembling I plugged charger back in and it won’t charge. No light at all. The battery is completely dead so it won’t turn on either Sounds like you didn’t properly reconnect the I/O board, or damaged said board or one of its cables, during reassembly.

Chosen Solution I used super glue because my screen is popping out. It worked, but now i got this brown and purple spot on the side of my screen. The first mistake was using Super Glue. This is not a good idea for so many reasons and yet it still happens. Hopefully you learned your lesson about it by damaging your phone. That being said now that you made the mistake it’s likely you will need to replace the LCD, support frame , components like the camera and now need to clean the LCD frame and potentially back....

Chosen Solution I’ve been having my iPad for quite a while, it was under my iCloud account so when I restored it it was iCloud activation locked, why? I bought it new and set it up with my iCloud Go to Apple Store, or apple website, and change your password. The change will get sent to your email. Then you can login again

Chosen Solution I tried to c harge it but still a blank black screen , after it fell in the water it turned to rainbow color with some types of lines and when the battery turned off it wont charge. i went to the maintenance and they told me they need to change the power ic , some kind of chip that controls the battery and the life of the iphone , is that the correct way to repair my IPHONE 6S....

Chosen Solution iMac “Core i7” 3.4 27-Inch (Mid-2011) EMC 2429 My iMac “Core i7” 3.4 27-Inch (Mid-2011) is unresponsive. I’ve opened it up to find only the first diagnostic LED lit. The other three are off. Before I buy the power supply and replace, I am trying to think this through. Prior to the computer not booting at all, I have on at least three occasions in the past, had trouble getting it to power on....

Chosen Solution I have a bluetooth problem on my iMac 2010 27”. Tried SMC, PRAM and even replaced the whole Bluetooth card, antenna and cable. Reinstalled MacOS high Sierra (erased and then fresh install), also tried removing the plist files. Under Bluetooth explorer, I get the following in event log when I try to open Bluetooth set up assistant. Anyone seen this and been able to resolve it? Process: Bluetooth Explorer 4....

Chosen Solution Are the iPhone 13 and 13 pro the same screen Hi Ameer, iFixit did a test to determine what parts may or may not be interchangeable between the iPhone 13 and the 13 Pro that answers your question. The Parts You Can and Can’t Swap Between iPhone 13 Models == Display == Vanilla/Pro swaps: No (connectors are incompatible)Same-model swaps: Yes, but without Face ID, True Tone, or auto brightness, and with a “genuine” warning So no, the connectors are not the same; you can’t interchange them....

Chosen Solution My iPhone 5 is dead, if I connect it via lightning cable to the mains, it works normally, what happened since I replaced the battery in January? The iPhone may be water damaged, or the replacement battery was of low quality. First try replacing the battery again. if that does not work, then try replacing the logic board. Logic boards for the iPhone 5 aren’t too expensive, since it is a very old iPhone model....

Chosen Solution Hi. A customer brought to our store an iphone 6 dead after plugging in car charger. I replaaced the u2 ic and it started charging with the correct voltages but it just stucked at logo and wont go further. I see no short and the mainboard doesnt heat. It didnt fall to water. The voltage going into battery is between 3-4.xx help pls. The client doesnt want to lose his inforrmation....

Chosen Solution My iphone 6 would die quickly after a full charge. I decided to replace the battery myself, so went ahead and bought a replacement battery through ifixit. I followed the instructions on the webpage. It turned on but I turned it off to double check everything is ok now it doesnt want to turn back on. I cant use the old battery because it was dead. Sceen doesnt do anything....

Chosen Solution I have replaced the screen in my Z4s a few times (I have more than one). However, this time the LCD FPC connector for the screen got chipped exposing the underlying pins. Neither the old cracked (but still working) screen nor new one will work now (no response - stays black). I can only guess the connector may be the problem. I have found it for sale at an online parts website, however, if it requires delicate soldering, I may not be capable of replacing it....

Chosen Solution I have an asus model TP410U, I assume it should be a similar fix. My battery wear is about 17.7% so I assume my charge level is around 82% and I charge my laptop like twice a day. I assume that I need a replacement battery but I do not see guides for this laptop anywhere at all could anyone please send me a link for instructions and where to buy the battery?...

Chosen Solution I was trying to download some programs on my iphone over the internet, and my phone went off. Now when I turn it on, all I get is the apple on the screen and nothing else. How do I reset my iphone 3G? You’ll need to connect the phone to iTunes then, do the following; Hold down the sleep/wake button (top button) and the home button (round button) at the same time until your device turns off....

Chosen Solution I am intending to change the battery in my iPhone 5s myself, something I haven’t tried before, but if it all goes well, I’ve been thinking about replacing the old, scratched case with a new one. How hard is a case replacement, or am I likely to mess it up? If you’re not experienced, then it is very hard. You have to transfer all the internal parts, like antenna connectors, buttons, motherboard etc....

Chosen Solution How to assemble the below components together - please mention all cables and connections Motherboard/ processor - INTEL DQ45CB MOTHERBOARD W/ CORE 2 DUO E8400 3.0GHZ + HEATSINK & I/O PLATE RAM - DDR2 - 2 X 4 GB HDD - WDC 250 GB Blue SATA No Optical drive Revisited: Steps Since you already put the processor and heat sink on the motherboard, instruction is not necessary. But before you install the mobo, use the below manual to install the RAM....

Chosen Solution I bought a second hand kitesurf epoxy board but it has a ding on the rail. I will fix it with Solarez epoxy resin which hardens with sunlight. I removed the shattered fiberglass. Most of the ding was only superficial so only the top layer of fiberglass had to be removed. However, there is a small spot in which I had to remove all fiberglass and the foam is now exposed....

Chosen Solution My HDMI port on the back of the tv is loose and the cable does not stay secure. How can I replace the port? Hello Bill, Open up the tv bij unscrewing the BACK PLATE. Now carefully remove the BACK PLATE until you see the LOGIC BOARD(the one with the connectors in it). Next you will have to check if the HDMI port is separated or is still making contact with the LOGIC BOARD....

Chosen Solution Gretings lads… After my phone fell down a swimming pool of 8 ft deep, i was sure that its quite rosted , lucky me thoug, i manged to save the phone. I have replaced the front camera (water damaged) and keeping the screen attached with some of the remaining old adhesive. Sorry for the long description.. :| My question is which type of tape/adhesive are used to waterproof the phone (any phone to that matter) ?...

Chosen Solution The 4 cable connection from the black box to the mother board. I pulled it off the board accidentally. Can it be fixed? Yes, this can be fixed, no problem. I’ve fixed lots of them in my shop. If the solder pads are in tact it’s just a matter of soldering it back on. If they have been torn off then it’s a matter of soldering jumper wires to connect the circuit....