Chosen Solution I used my generator for hurricane Matthew. I read on here, at that time, that there were certain things you should do to make sure it didn’t get stale gas or gas in the carburetor. But, now I can’t find those answers. http://ksrsales.com/content/31-portable-…
Chosen Solution My aluminum chassis on my iPhone SE bent at close to a 22° Angle from the bottom side of the volume down button clear across to the top of the SIM tray, and it’s torn the bezel of the screen away from the interior of the chassis at the top of my phone, and partially at the bottom, WITHOUT breaking my screen at ALL (miraculously) and I was wanting to know if anyone knew how to bend that chassis back into shape right, or knew where I could just buy a replacement chassis?...
Chosen Solution hi i want to replace broken back glass sheet of iphone x i removed all but newone cant fix without removing camera bump , how to remove i tried but it looks hard ????? Hi Shahid, here is the link to the iPhone X Teardown. If you scroll down to step 22, it explains how you can’t remove the camera bump. Hope this helps. John iPhone X Teardown This is from step 22 Bonus round: What happens when you break the rear glass on your brand new iPhone X?...
Chosen Solution I Break The Chip where the green line cut soo can i Start my iphone or this gone some sort ciruit ? That is the antenna tuner IC. Depending on the damage, it may not stop your phone from booting up but it will certainly affect your ability to connect to WiFi or Bluetooth. Please post a picture so we can see the damage. These IC’s are available on Aliexpress....
Chosen Solution After replace the screen on my IPhone with the replacement screen I got from I fix it and powering the phone back up. All I get is differ shades of blue lines run up the screen and a black dot in the top right corner with a few mult colour pixels just above Thank Try another screen or your original screen to determine if your new one is defective....
Chosen Solution A month or two ago, I dropped my phone and cracked my screen but I wasn’t mad, I could still read words on it, use it normally and watch youtube on it. A few days ago from now my phone dropped again, but this time there was more damage to the phone. The crack was deeper so I couldn’t see anything through it. My lg k20v works fine, but the screen is cracked....
Chosen Solution I replaced my iPhone 7 Plus lcd and now the home button doesn’t work but the Touch ID works I reused the original home button. …. I replaced it with an aftermarket and the same result … I put the an oem scene back on with oem button and still the Touch ID works andhome button doesn’t … I don’t care if the Touch ID works but I need home button to work ....
Chosen Solution So my ps4 has been overheating, being really loud to the point where I can hear the fan even with noise cancelling headphones on. I tried disassembling it to fix the fan and thermal paste but I think I only made things worse. I removed the thermal paste with a wash cloth and rubbing alcohol but when I reapplied it I think I may have gotten some on the motherboard and may have screwed up putting it together....
Chosen Solution So what’s wrong? What seems to be the problem is that The iMac gets stuck on this grey start up screen Then the fan goes crazy as I have a feeling it gets stuck and doesn’t know what to do next… Maybe it needs a fresh install of an operating system but I’m not sure, I don’t own an operating system for the computer that I can put on as got the iMac from my old high school....
Chosen Solution The device in question is a Sony sound system for my vehicle. Model: CDX-CA900. I’m having trouble turning it on anymore. At first I thought that the Source button (turns it on, it only has a few buttons) might be faulty. So I troubleshooted and reset the whole thing, and even did a continuity test on the button. Seems to work, but when I force it to work by putting a CD in to turn the system on, the volume goes up to maximum....
Chosen Solution Hey everybody, I installed the backlightpanel into my MB Unibody A1278. I followed the instruction given on ifixit.com. Every cable is exactly connected, but the keyboard is still not illuminated. Has anybody any idea to get my keyboard illuminated? Thanks for any helpful answers. Christian Hey there, now it works. There’s a sensor installed and this reduces the brightness. I didn’t know that it is build in. Now my backlight shines and looks great....
Chosen Solution Hi I have a Yamaha PSR 400. The keyboard is intermittently loosing sound, i.e. every 4 or 5 keys then no sound. It’s not any particular keys. Not sure what it would take to fix this or if it’s even worth it? Thanks Hi @jubilee, Presumably you mean that after playing the keys the sound stops. Is this correct? What do you do to make it play again? There may be a loose cable connection between the keyboard circuits and the mainboard and the vibrations caused by playing may cause it to disconnect....
Chosen Solution I replaced my screen and digitizer and swapped the home button. Home button works fine but my iPad still doesn’t recognize touch inputs! Any thoughts on what may be wrong? I dropped the iPad, got a heat warning (was also using it in the sun) and touch was not responsive…. same issue now Since you replaced the screen and taken for granted you’ve already double checked it’s properly connected, there’s nothing left but the circuits controlling the touch on the logic board....
Chosen Solution My 2017 iPad Pro (1709 wifi+cellular) died and stopped charging suddenly. I use it for light tasks such as office applications and media consumption and I take care of it. When I connect a charger, it shows a charging sign on the screen for a few seconds, however, the battery does not charge. Took it to 2 different repair shops (unfortunately i don’t have access to Apple authorized service provider) both could not fix it and recommended replacing the logicboard....
Chosen Solution Hello to all !! I bought this iphone 6 with water damage, is dead , not turnin on. Taking it apart I saw that the oxide was only on the front LCD-touch .. … and on the back where the main condenser C5202_RF vcc. I have measured out my knowledge in a 0,002 line pole and the other 0.00, meaning it is short? Before removing it I would be sure Thank you...
Chosen Solution I have a friend who’s iPhone 6S+ phone had an aftermarket battery in it that’s been working fine for well over a year and some change. Recently the battery started expanding. They kept using their phone, despite the expanding battery. The battery expanded to the point that it was pushing against the glass, which created a gap between the frame of the phone and the bezel of the screen assembly....
Chosen Solution I broke the glass on my 6s and had it replaced by a third party (not Apple) and sometime later I started losing cellular connection almost every day. This could be fixed by doing a hard restart, but it would re-occur, giving the message “invalid sim”. I took it to the Apple Store and they instantly recognized that it had a third party glass. They put a new sim card in it and everything looked ok, A few hours later however I got the same sim car fail message....
Chosen Solution Hi everyone! So, my girlfriend’s iPhone 6s got water damaged from what she told me. She said water spilled on her phone while she was at work but she wiped it off fast and thought nothing serious so she continue using her phone like usual until she got back home from home. On that night her phone started acting weird and to the extend she couldn’t use her phone at all and she tried to turn the phone off but it won’t let her to do it....
Chosen Solution Anybody know how to remove the back panel from a Samsung Frame TV, model QN65LS03RAFXZA? Patrick Chung looks like this is one of those weird back cover models
Chosen Solution How much does it cost to replace a shattered screen? Marise Semira do it yourself and the LCD can be had anywhere from $60-$100USD and up. This video should get you there. If you do it via a third party anywhere between $150-$200USD
