Chosen Solution I recently replaced my iPad mini screen and now the sleep/lock function no longer works,is this due to the quality of the screen? I checked in the settings and it is turned on and I have tried a couple of different cases. Many thanks Sorry to hear you are having a problem with your ipad Tom. First I would go back and make sure there is no damage to flex cable with the audio jack....
Chosen Solution iPhone 5 suddenly developed the “Searching…” problem (no cell service, only wifi). After researching, I did a backup on iTunes, then restored all factory settings. Now, phone will not activate! Error message is “Could Not Activate iPhone because activation server is temporarily unavailable. Try connecting to iTunes or try again in a few minutes.” Have tried dozens of times through iTunes and wifi, even bought new SIM card, still SAME ERROR....
Chosen Solution My iPhone 5S earpiece,Microphone & Headset jack not Working after ios 8.1.2 update… Whatall i did: Replaced Charging port attached with microphone & Headphone jack Replaced Earpiece attached with proximity sensor cable Replaced Earpiece Speaker but still it continues to be same… iPhone was charging good & loudspeaker works fine before & after replacemet cant find whats the problem…. somebody please help me Restore / Update iPhone via iTunes?...
Chosen Solution Hi can anyone help. My iPhone 5s keeps rebooting. Hello, so sorry to hear about your problem. This is most likely a battery shortage. I would suggest trying to get the battery replaced, and i bet it will start working. 5G and 5S have this common problem. Hope this was of some help! Have a good day!
Chosen Solution Hello everybody, I have been searching for iPhone 6 WiFi antenna through google and other websites, but I got two different antennas in the design, and I do not know whats the difference between both of them? Could someone help me on this please? I attached the related photos to them. Thanks, Antenna 2 Antenna 1 Antenna 2 is the antenna wire for the Bluetooth and Wi-Fi. The Antenna 1 piece is used to connect the antenna from the phone housing to the other antenna contacts if I’m correct....
Chosen Solution I purchased an iPhone 6 that had some water damage. The phone itself would continue to go through the boot loop and never actually restart. The only way I could fix this is by unplugging the battery, plugging it into another device and charge for 30 seconds or so, then plug it back in and it goes through the loop and acts normally. After that, the phone stayed on once until the battery died....
Chosen Solution iPhone 6 bent badly at the bottom it bent the motherboard slightly near the charging connector. Said no sim even though the SIM card was still in the phone. Put the motherboard into the new housing and inserted the SIM card in keeps saying searching when I pull out the SIM card it still says searching. I’m going to try to replace the charging port beacuse it has an antenna....
Chosen Solution I replaced a screen and battery on a 6s+. The customer brought it back afterwards because he said it was laggy. I did a factory reset on it but that didn’t work. So I tested the phone with a couple other new screens but that didn’t fix it. I also tried a couple new batteries but that didn’t fix it. I noticed it was fine when charging but not when unplugged....
Chosen Solution How do I replace the left rear tail light assembly on my 2007 Toyota Highlander @kemisi ,Kerry Simms remove the small interior trim cover opposite of taillight being remove, unplug harness and remove the 2 nuts holding taillight, pop out tail light. Reverse procedure for install. The 1st link shows how to access taillight to enable you to gain access to the mounting bolt/nuts. The second link shows you a clear pic....
Chosen Solution macbookair “13 2012 i want to unsolder memory and add 16gm memory to the board You don’t. Standard RAM: 4 GB, 8 GB* Maximum RAM: 8 GB* Details: *4 GB or 8 GB of RAM is onboard. It could be upgraded at the time of purchase to 8 GB as a US$100 option (and 8 GB is standard on the MD846LL/A configuration), but it cannot be upgraded later....
Chosen Solution I was with my friend and they pushed me into there pool and my phone was IN MY POCKET!!!!! Now it is all wet and I don’t know what to do. Please help!!! First of all dry the phone thoroughly with a dry cloth. Take out the battery and dry it as well. DO NOT put the battery back in the phone and try to power it on. Now get a bowl and fill it with enough rice to cover the entire phone....
Chosen Solution I put in a SD card to the reader but it could not put out it, so I put it by force! Now the readers Iron strings are up and the reader can’t read! https://d3nevzfk7ii3be.cloudfront.net/ig… looking at the teardown, it’s soldered. take it to a repair shop if you find a part, should be an easy soldering
Chosen Solution For disassembly and cleaning? And for an LCD replacement if needed? My phone is suffering water damag causing the display screen to blackout while the sound and vibration work properly. Phone contacted water yesterday and after sitting in rice for a day, it still has the same issue. I just got it last month and I’m hoping the repair wouldn’t cost as much as the phone itself. oldturkey basically summed it up , but to give you an idea the water damage service we offer at my shop is 75 dollars, for any phone, to get it back in a working state....
Chosen Solution I have an Apple LED Cinema Display that has a charger, mini display port, and usb attached. My PC has an HDMI port and VGA port. How can I use the monitor with my PC? I think you’ll find getting a new graphics board with a DP connecter the easier and cheaper way. Yes, you could fashion a collection of adapters to make this work but between the cost and the crappy output from what this display could offer I think you’ll be better off with a new board....
Chosen Solution My Yamaha RAV227 Remote is suddenly not working . Changed the Batteries. No LCD Display on the Scree, No Transmit Red Light when Buttons are presed. I unscrewed a Screw in the Battery compartment. It is very hard to Pry. Is there any other Screw or so? My Email address is: cybermosaic@hotmail.com Hi, Here is a link to an ifixit answer to the same problem in a similar Yamaha remote control....
Chosen Solution when i press the eject button the disc tray opens a little bit and i was using swap magic to play japanese games i need to know how to fix the ps2 I would try and clean out the optical drive, as something may have fallen into the drive causing it to jam. Here is a guide showing how to open the PS2, that should help you out.
Chosen Solution I have managed to unclip the ARROW DOWN key by moving a plastic from center to the left of the key. But the bottom is still in place. Are there other clips? How to completely remove the key? Hello, Just to follow up on this issue, I reached Apple and it insisted that I went to the nearest Apple Store to have a look at the issue, as sending through mail was not permitted....
Chosen Solution Getting pink and blue lines all over, Apple technician said it is the display cable. Any advice? I am based in Barcelona. Ouch! Not good Sadly, you can’t replace the cables in either the Function Key or Touch Bar systems! All you can do is replace the complete display assembly. Here’s a view of the connections: In any case your cable is not the issue here any ways. Lines implies the LCD got damaged: a bang, dropped or something sat on your system....
Chosen Solution the screen was cracked about a month ago and continued to work , but now the screen is frozen and won’t allow me to use it or power off. Have you tried holding the power button down for 60 sec or until it does shut down? you can also open the case and disconnect the battery HP Tablet Repair select your tablet , most have opening instructions Hope this helps...
Chosen Solution So I dropped my phone today. It was not working at all so I read on this website to leave alone for a while so when i did it worked. But the problem is I cant get into my phone because half of it is covered with lines and some of the numbers for my password for my phone are covered in lines. HELP ME PLS!!!!! When your device has lines on the screen, there’s a chance that your iPhone 6S has been hit so hard that the LCD cable has managed to disconnect from the logic board....
