Solved Ipaq Will Not Charge In Cradle Hp Ipaq H4155
Chosen Solution h4155 will not charge in cradle, if i take the battery out of the ipaq it will charge Sounds like a bad battery. Replace it according to the instructions on your other question :-)
Chosen Solution h4155 will not charge in cradle, if i take the battery out of the ipaq it will charge Sounds like a bad battery. Replace it according to the instructions on your other question :-)
Chosen Solution I got this iphone from a customer, when he gave it to me the screen was not working but the device was found by itunes. He told me he had lost it in the snow and after that it didn’t work. So the first thing i did was to open it and see if the water indicators was red. but they waren’t. Not a single one of them were red....
Chosen Solution I have an iPhone 5 that came to me with a battery problem. It was dead when it arrived so I put a brand new battery in which got it working fine. The next morning it was completely dead again. Nothing when I connect to iTunes either. So I put another battery in and same story. Works fine then the next morning its dead. Both batteries are completely dead, I’ve tried them in a working phone and nothing....
Chosen Solution I got this phone for $2 on eBay and the reason it is dead is due to the U2 Chip failing. I have gotten the phone to boot and charge but will it function stable as long as it never dies? Is it still cost effective to have the repair done? That just depends on where you are and what your local microsoldering market charges. It should be one the cheapest since it’s probably a straightforward repair....
Chosen Solution anybody know that iphone 6s screws size, i need to disassemble the 6s, but i need to get the right screwdrivers first, can somebody give me some information about the inside screws , is it phillips or pentaloble? thanks in advance! Phillips and there is kind of phillips head screw with a hole in it, not sure what its called. That is pretty much it. Only two types of screws in the phone really....
Chosen Solution i have an iphone 7 bootlooping. I restore the device by itunes but did not fix the problem. I disconnected the front facing camera’s flex and tried to boot, and booted normal. Then i bought new original camera with flex and replaced the old one, but no result, still bootlooping. The device boots normal only without connecting front facing camera’s flex. Any ideas?
Chosen Solution I have an issue with my iPhone 7 with Facebook app when I press to like a post it does not work I have to press harder I tested the screen and diagnostic passed no hardware issue Could this be a bug in the Facebook app ? Most likely, have you deleted and reinstalled the app?
Chosen Solution I just want to clean up the inside of my MacBook Pro 15” A1990 that I have had for 2.5 years, but after unscrewing the 6 screws and undoing the internal clips, I can’t get the bottom to slide off. I have seen numerous guides and they all show the same thing: After undoing the clips, they slide the bottom down from the hinge and it comes off easy....
Chosen Solution changed my battery and now the radio is locked, how do i unlock it? These radios came with a five digit code as an anti-theft feature. You have to enter the code after you disconnect the battery. Originally the car would have come with a small card that had the number on it. If you got any original paperwork or manuals with the car, it might be in there....
Chosen Solution My iPhone got dropped in a sugary liquid, but only for a couple seconds. Since it was sugary, all of the side buttons and top button are now sticky and causing problems with the volume. Is there any way of opening the back and cleaning this so the buttons no longer stick? I even had a LifeProof cover on it but somehow it still got wet inside (I don’t know how that happens?...
Chosen Solution We need to perform a LCD & Digitizer replacement We are working on one of these for the first time, cannot seem to find a guide, and also cannot figure out how to get the inner back case apart or off. Any guides or suggestions are welcomed. Thank you in advance. https://www.youtube.com/watch?v=FHZRZuhD… here its not in english but you get the idea I’ve just finished one of these, and it didn’t go well....
Chosen Solution This lazyboy reclining loveseat has a lift up lever for footrest on both sides. The arm rest on one side is very loose. Looking for a diagram to locate the bolts/screws that need tightening. Thankyou Gem Most furniture have dust batting on the bottom sides. Most likely you will need to pull the staples to remove the cover to expose the mechanism to get to the loose screws. Once you find the loose bolts/screws put some plumbers teflon pipe tape on the bolts/screws to use as a thread lock or get some Loctite thread sealer....
Chosen Solution I Found An Old Mac Pro Without An Hard Drive. I Was Able To Put In A WD Hard Drive But I Have Not Found A Way To Load The OS. Owen, first find out what year your machine is. The reason is the The 2009 model will not upgrade to High Sierra without an EFI flash. Also the 2006-2008 model look very similar to the later machines but will only take up to a maximum of El Capitan....
Chosen Solution hi!…my sim card got stuck inside the place to put the sim card tray because i inserted the sim without using the sim card tray…is there any way to get it out….and what instruments would i require for the teardown?? Tweezers. Be careful, you need to remove the card from inside, not the outside hole. Swimming your tweezers around in there is a good way to damage things. I don’t really have a guide for this....
Chosen Solution My induction hob failed while in use. It blew the circuit breaker, and since then it blows the breaker immediately on being plugged back into the power. The ventilation to its underside was not good, so I think that overheating might have caused the failure. Inside, there’s a main PCB, a control/display PCB, a fan, and the induction coil assembly. There is no “hard” power switch - it’s all controlled by the capacitative touch-buttons....
Chosen Solution I have a 97 Honda Accord 4 cyl sedan 2.2l I’m trying to remove and install the Oxygen sensor code po137 This shows bank 1 sensor 1 https://www.youtube.com/watch?v=KXCt_qt_…
Chosen Solution The health condition of the battery information reads service battery. What’s the best replacement battery? Is this something I can do at home or should I hire a technician? Replacing the battery is quite easy! Here’s the IFIXIT guide MacBook Pro 15" Unibody Mid 2009 Battery Replacement and the needed part MacBook Pro 15" Unibody (Mid 2009-Mid 2010) Battery. The only rub here is the shipping of the battery review the shipping info to see if you can get it from IFIXIT directly or you’ll need to find one thats more local to you....
Chosen Solution Why can’t I access my files it say something is turned off or not installed? The only thing I can think of without seeing the device is that one of the main programs that utilizes whatever you’re are attempting to open is disabled OR needs to be updated in the play store. If you go to settings > applications> and look for the disabled and/or check for a software update, check the play store for application updates that may run the file you’re attempting to open....
Chosen Solution Hi, I dropped my iPhone the other month and when i did i then stood on the camera which of course cracked my screen and disabled the camera and flash working, i then replaced the screen and digitiser, which worked perfectly but then i realised that the camera and flash were still not working. So i decided after researching for hours and hours on what to do i decided to go off what majority of people had said....
Chosen Solution Actually I entered More than 20 times wrong pattern. I forgot my email id and security questions how can i reset my phone You will have to contact you email provider directly, if you remember who that is. UPDATE Let’s see if I have this correct, you bought this four years ago from someone else, never set it up, and you are trying to enter your email address or theirs?...