Posts

Chosen Solution Hello, Just wondering if anyone has been able to remove the cap covers on the hinge, and what the process was like? Thank you, Bill I’ll warn you even if you get the caps off you may not be able to rotate the stand around that way. Looking at X-Ray from the iMac M1 24" Teardown it looks like they are press-fitted and maybe even glued! You’ll need to be aggressive to get them out drilling is about the only way I can see as workable....

Chosen Solution Hello, I have OS 9 1.1 and can’t get in because I do not know the password. How can I get in, change the password or do away with the password? Thank you! The change name software was generally on the system installation disk. Lets first identify your exact machine. For that we need your serial number. UPDATE 8/15/19 You have a : Apple iBook G3/366 SE (Original/Clamshell) Specs Identifiers: Original/Clamshell - M7716LL/A - PowerBook2,1 - M2453 - N/A Pre-Installed MacOS:8....

Chosen Solution Ematic Eth103 13.3" tablet having problems with progams not working hanging up, I go to youtube and can not get out of full screen. Deleted some programs tried to upgrade to android 5.1 could not do it. Tried to reset by holding down the power button and the volume up did not work volume down same thing. What can I do. Soft Reset Step 1 Locate the reset button next to the headphone jack on the side of the tablet....

Chosen Solution Hi All, I have elantra 2007 and i have problem when i shift the gear from P to R or from R to D the car kicks once and the RPM will not exceed 2000 RPM this happens when i start the car. It’s also happen when driving like 100 KM/hr the car also kicks and i can’t exceed 120 KM/hr. Hint : The gear is Auto Read about it here....

Chosen Solution my Alcatel IdealXCITE 5044r my speaker works fine untill I try to use it in a call then i can’t hear it unless I put my ear to the phone but it’s not comeing from u put your ear. It’s comeing from the bottom. Of my phone. Where the normal sound comes from. And as soon as I. End the call it gets loud again for ringing and alerts and videos....

Chosen Solution I was playing on my iPhone 7, suddenly the screen froze and I thought nothing of it and turned the it off using this method by holding the power and the volume down button I managed to turn the phone off. I then tried to turn it on by holding the power button. The phone started up naturally and then it just turned off and turned on and kept repeating the process....

Chosen Solution So, I bought a 32inch LG TV off of a auction. I did not know it’s a hospitality TV until I realized some of the settings are disabled and the smart apps are disabled, which is not a big deal because I hooked up a Roku and it works fine. I would really like to know if anyone knows how to reset the tv or get the full functionality back....

Chosen Solution I need to replace my logic board. Knowing there could also be a potential problem with the power supply (the iMac is a customer abandoned unit from 3 years ago), I may just play it safe and replace the power supply at the same time. Is it possible to upgrade the 1.8 logic board with the 2.0 logic board and upgrade to the 2.0 power supply in an iMac that originally was a 1....

Chosen Solution Hi I have a 2011 iMac i5 3.1 and recently purchased a UPS. The mac ran as normal for a few but suddenly went off while i was watching a movie. Now it won’t turn on at all the 1st diagnostic LED is on (green) but when i press the power button nothing happens. If i hold down the button while plugging in the power and release it the fans spin at full speed but no other response from the mac please help!...

Chosen Solution is there anyway at all to get more juice out of my video card? I have Windows 7 installed for my games, and I’m wondering if there’s either a hardware upgrade I can do, or if there’s a utility to tweak it? any help would be greatly appreciated! Since this is a 17" Unibody MacBook Pro, it has an Nvidia GPU; so unfortunately, Asle’s suggestion to use ATi software would likely be useless here....

Chosen Solution I am starting a business providing tablets to elderly people, some of whom will be hard of hearing so increased volume output and clarity of sound is important. I need to talk to someone who can help identify what speakers I can use taking into account size of required speakers (dimensions), output and power requirements. I will probably have to build a casing and holder to house the speakers and slot the tablet into the case but I really need help to identify the best solution....

Chosen Solution Hello ! The Ipad Mini 3 suddenly stopped turning on at all. I checked the battery’s voltage and it’s ok. I tried to plug the iPad on my Macbook, it doesn’t detect it. Can anyone help me? Thank you Hello @danj et @arbaman, last time you helped me a lot with my MacBook issue (and I’m still writing from it, again thank you). I was wondering if you had any idea on the following matter ?...

Chosen Solution iPhone 5 pretty bad break, constantly shows searching after powering the phone on. Had a look inside all the connectors are fine and the SIM tray looks fine too. However I can feel heat coming from the two connectors near the battery connector as highlighted in the picture below. Not that familiar with the board components just wondering if anyone else has had the same problem? Best regards Thomas Lasota....

Chosen Solution Hi guys, my iphone had last week a water damage. After that I took it out of water, I tried to dry it with rice, unfortunately I couldn´t switch it off (because the middle of screen did not work). There were lots of vertical lines and the middle part of the screen (where we enter 2, 5, 8, 0) wasn´t working. After waiting 2 days, I wanted to open the phone, however all of a sudden the screen doesn´t work at all....

Chosen Solution I left the top open with a sheet of paper ready to print in the morning. In the morning I printed the 8x10 photo then changed the guides for 13x19 paper. When I tried to print it sounded like a machine gun. There were many dog kibbles that had been hid by a mouse who has been steeling dog kibbles and hiding them; this time in the printer. I got most of them out so it doesn’t make noise, but it doesn’t feed evenly and jambs....

Chosen Solution A few crumbs dropped into my keyboard and i’ve been trying to get it out. Does anyone know how to remove keys without breaking them (I have an ifixit kit with opening picks if that helps)? I don’t want the crumbs to cause future problems so I wanted to try to remove them. Also my MBP has the new scissor keys (magic keyboard). I would hold the system upside down and using a can of can’ed air with short soft blasts spray the keys starting on one side and work across....

Chosen Solution The trimmer itself is a Stihl FS 40C, I cannot get the head to stop spinning in order to twist the Shakespeare head off of the threads. I can provide any additional information as needed. Thanks in advance! With the trimmer head on the ground, on top of the gearbox where the head is, is a hole. You put a bar in and turn the head until the bar locates in a groove inside....

Chosen Solution So I was going to replace the screen on my iPhone SE but I can’t shut it down to do work on it because the scream won’t display anything, I need to know how to shut it off so I can fix it. I know it still works because it will vibrate when you turn on and off the ringer, and Siri still works. You can press and hold the side button plus volume up for about 8 seconds but without the screen working you don’t know if you have succeeded....

Chosen Solution this is a 2013 model and it doesn’t have screws at the back, I need to find the serial number. Hi, According to this link it states that it has internal serial numbers. That doesn’t necessarily mean that they are visible on the inside, they may be stored in software. https://epsstore.ti.com/OA_HTML/csksxvm…. Here is a link that may be of some help. https://education.ti.com/educationportal…

Chosen Solution I have an issue which relates to the micro usb port on my Nexus S not working. How hard or easy is it to change the port ? I’ve looked at the disassembly here on the website and did not manage to see clearly how the USB port was connected to the board. Best regards, Daniel Daniel Manolache, it is soldered onto the board and will require soldering to replace....