Chosen Solution My son broke my apple watch by slaming it on the ground and the screen came off and the cables connecting the screen to the display broke off what should I do? the only solution is to have Apple replace the device.
Chosen Solution Stupid me bent a few pins in the lvds socket of a wacom 21 UX. I was since scouring the web to replace the socket that was broken, but came up empty handed. Maybe someone could point me in the right direction. I’ve added photos of both the connector and the socket. The socket seems to have a pitch of about .5mm also the connector seems to be a really small Dupont connector....
Chosen Solution is there a nother point i could wire the positive to and it still work stephen JR, here is my answer to a similar question:“If the pad has been completely ripped off the board, the only options would be: Find the trace the pad normally connects to, scrape off some lacquer and re-attach to a new point. or 2) Replace the whole board. You should be okay with attaching the cable to the race or the next point where the trace leads to....
Chosen Solution I need more ram also keyboard needs to be repaired It’s soldered on this one. Asus has moved to soldered RAM on most of their laptops within 5 years. The part that is absolutely infuriating is the ROG machines don’t have this problem - or at least have half soldered/1 DIMM module setup.To be honest, I suspect that’s because the buyers of ROG laptops will have no hesitation to cut them off for soldering RAM in a gaming laptop and WILL call them out so bad, they won’t recover....
Chosen Solution My iMac keeps restarting randomly. Often just seconds after power up and sometimes after a long time. The screen simply goes black and then I hear the boot chime. I saw several topics about this issue with mid 2011 27" iMac and I don’t really know what to do. Is this really a graphics card failure that restarts my iMac randomly? (Radeon HD 6970M) Am I stupid to go and spend $250 on another one and try?...
Chosen Solution Hello! Nearly a few days after replacing my iMac HDD with an SSD, after taking out SSD and putting it back i found it non-working. My first guessing was a bad LCD connector so i bought a new one, but it still didnt work. Plugging connector in the logic board nest felt bad, unlikely the same nest on the LCD, so i decided that the problem was in ligic board nest....
Chosen Solution Hi, I have an iPad 2 which had a cracked screen, so I went online and bought a replacement immediately. After the tear-down and replacement of the parts, I placed the screen on the device (without the adhesive) to test it before sticking it down. However the touch screen is completely unresponsive but all physical buttons work fine (home button, power, etc), So I wonder whether it’s a faulty digitizer?...
Chosen Solution Hello my fellow fixers and heroes. I’m interested in a faulty iPad 10.5” on auction which has the fault described in title. It shuts down by it self and after 10min of charging, it shuts down again. The seller had it looked up. And they told him/her that it was something with the “power supply chip". Which I translate to charge board flex cable? I don’t know. Therefore my question....
Chosen Solution Hello all, So this iphone 6s I have had for a long time. I replaced the screen and other components and it was working fine. Then through a power outage one day the phone would not turn on. I went through the usual initial checks (cables out, anything looked burnt) but nothing. I don’t think its the screen because I just replaced it and when I connect it to my PC there is no read....
Chosen Solution I cracked the screen on this laptop and now there is a big black blob on the top right corner. The laptop is running fine and I can do everything I used to do before it was cracked. Geek squad said it would be cheaper to buy a new laptop than it would be to fix this one but I don’t believe them. If I can do it myself, would be better than wasting this laptop....
Chosen Solution I want to use the lift-away feature on my vacuum to clean hard to reach places, but I am uncertain how to do this. To use the lift-away canister you will first separate the detachable canister and remove the extension wand from the vacuum sheath, then reattach the wand to the desired floor nozzle. Now you can vacuum where you please while you carry the canister in one hand and the nozzle handle in the other....
Chosen Solution I accidently turned voice over on,but now I dont know how to get rid of it. I don’t know to how get the screen to go down. I have tried many times. I just can’t get it right! Please help! Wendy, use itunes. To turn accessibility features on or off In iTunes Connect iPhone or iPod touch to your computer. In iTunes, select your device. In the Summary pane, click Configure Universal Access in the Options section....
Chosen Solution how long does it take to charge a wahl beard trimmer Hi, This is taken from the Wahl website. It says 1 minute quick charge, 1 hour full charge. If you are having problems note the 5 year warranty symbol in the picture. Here is a link to the warranty information. The warranty may vary depending on where you are. http://home.wahl.com/support/warranty
Chosen Solution Hello, I purchased this tablet yesterday, set up a password I normally use on other computers. I must have typed it in …incorrectly. Is there a way to do a factory reboot so I can reset my password? Hi Try the following: Press the power button and volume down at the same time. The DOPOD logo will appear after 6 or 7 seconds. Release power button 1st then the volume button....
Chosen Solution The display screen of my Samsung galaxy tab S 8.4 got broken and damaged after I got slipped on the stair case. Will I be able to repair it without loosing my photos and document S.it’s totally damage d inside As long as you did not damage the motherboard you can change the screen without doing anything to your data . You can change screens without affecting anything on your tablet …....
Chosen Solution how to increase the time running in auto start @sugerbear I would suggest to consult your user manual. If you can’t find the info in there the dealer will most likely be your best friend. You should at least give us the proper year and why you need it to be increased.
Chosen Solution how do i raise the handle bar on my raleigh m20 mountain bike There are three ways to raise the handlebar height on your bike: adjust the stem height, adjust the stem length/angle, or replace your current handlebars with bars that have more sweep and rise. Adjusting Stem Height The stem is the component that attaches the handlebars to the steering column of your bike. The method of adjustment depends on the type of stem that is on your bike, so first identify which type of stem you have....
Chosen Solution How to repair the display of a Casio FX-991ES Plus Calculator Hi @angeltwayana , What is the problem with the display? If it needs replacing unfortunately, I’ve been unable to find a replacement LCD screen. You may have better luck. Given the cost of a new calculator it may be uneconomically viable to replace the screen even if you could find a replacement part. If it’s just that a line may be missing in the display or certain sections of the display is not working, you could always try dis-assembling the calculator and inspect the display module connections to the systemboard in case it is a faulty connection that is causing the problem....
Chosen Solution How to replace a heater core? Heres a idea of the work you need to be prepared for and have a good 10hrs ready to kill https://www.youtube.com/watch?v=dDfbtNLf… Good luck with this and dont forget to disconnect your battery nothing ruins a job like getting an airbag in the face.
Chosen Solution Just replace it, it doesn’t read well. Hi Patrick. Before replacing the sd card slot, try bending the pins in the sd card up slightly. It may be more worthwhile and work just as well as replacing the slot. Check out the ifixit guide for the D40 teardown here: Nikon D40 Mainboard Replacement Sometimes the pins in an sd card slot get bent down from wear over time. The pins are intentionally bent up toward the middle of the slot so when an sd card is inserted, the pins interfere with the pads on the sd card, creating a pin-on-pad contact....
