Posts

Chosen Solution Late 2011 Mac book pro. 17. I bought this computer when it first came out. Refurbished from Apple. No Apple care. I only used it maybe 20 times before the devastation hit. I was driving. My sister had the laptop open on her lap. We made a left turn and someone came out of no where going 60mph and everything broke. My car was totaled.My sister was in the hospital and my computer was destroyed....

Chosen Solution approximately 10 minutes in small waterfall till found..fixable or dead PLEASE Hi, As you know water and electronics and electricity are not a good mix. The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components. The corrosion doesn’t stop until it has been cleaned away First do not turn on your phone and then you need to remove the battery as soon as possible from the phone to minimize further damage....

Chosen Solution Hello all, I have a question if somebody has the same problem as I have. I have iPhone 7 with fresh iOS 11.3 with fixed display. After updating the microphone stopped working and even when I tested it with the original display it is not working anymore. Until update it was all working OK. Thanks. Backup the phone via iTunes then restore it which will wipe all data on the phone....

Chosen Solution replaced digitizer and after mini didn’t work won’t power on? checked all conections charged batt no go. this is an iPad mini A1490. any sugestions on what try next? Let’s check if the iPad has a no backlight issue. First of all, plug the iPad into the computer and open up iTunes, if it boots up it should detect the iPad either as trust this device or locked with a passcode....

Chosen Solution I dropped my phone out of the car and it jammed in my power button, so when I got home I opened up my phone and tried to fix the power button. I wasn’t able to so I put it back together to find it in recovery mode. I have looked how to fix this, but nothing I have tried has worked. I tried to restore it with iTunes....

Chosen Solution Dear all, I have some trouble with my iphone 11, this one reboot 2 or 3 minutes after starting. If i don’t use it after the starting, this one doesn’t reboot…. (I have replace the rear glass this one worked fine before replacement) I try to : Restore and Update iOS : No result ! Try to disconnect all accessoiries on the logic board : No result ! When i go to the log files, it look like one of the sensor is missing and make the phone reboot !...

Chosen Solution I had an iPhone 6, upgraded my phone and left it on a shelf, I’d occasionally turn it on to get photos off it and this time I plugged it in and it showed the battery low screen, a while later I checked it and it went totally unresponsive. I’ve tried swapping the board to a different housing, I’ve tried putting different batteries that I know are charged, nothing works....

Chosen Solution Is the iPhone 5 and iPhone 6 charging port interchangeable? No. These charger ports are extremely physically different and the charging dock ribbon plug will not fit as well. The image below is a iPhone 5 black charging dock assembly. The image below is a iPhone 6 black charging dock assembly.

Chosen Solution My wifi connection to any wireless internet is crap. Are there any guides out there on how to upgrade my wifi card and where to purchase a new wifi card? Before you get started with the upgrade, make sure to unplug the power adapter from your laptop and remove the battery if possible. If you have a nonremovable battery, be careful not to accidentally turn on your laptop while you’re working inside it....

Chosen Solution Hi! I replaced my girlfriend’s white iPhone 6 panel, and it works super well, and the quality of the screen seems almost like the original. I can’t really notice a difference. The edge is a bit uneven, though, when compared to how an original panel looks like. Small gaps that a detail oriented eye would notice (like mine ;)). E.g. by the headphone connector. My theory is that it wouldn’t be noticeable when replacing a black panel....

Chosen Solution No power to the outlet. What should I do to repair it. If you have a multimeter /voltmeter, turn it to AC Volts, 200V + range. In the US you should have a reading of 120V between hot and neutral, 120V between hot and ground, and 0V between neutral and ground. If you look at the outlet, you should see that there is a narrow prong, which is consider the “hot” prong, the wide prong is the “neutral” and the round prong is ground....

Chosen Solution I need to replace the old noisy fan of my xbox. Where can i find a compatible fan, and how to replace it ? Thanks in advance for any help. Xbox Disassembly shows you the How-To and the fan is available at multiple sites like here also do not forget to check ebay.com :-) Good Luck What you can do is buy an intercooler. works just as good:)

Chosen Solution I’m having some real issues getting the screws back in Of course, the screws come out with no problem. I’m having some real problems getting them back in.I’m having some real problems getting back in, namely just lining them up in the holes. I just can’t seem to find the holes or when I do, that initial catch is really hard to achieve. Suggestions are appreciated. I consider my fingers smaller, I would think that would work in my favor so I would think that would work in my favor but it doesn’t seem to be helping here....

Chosen Solution The pads that were on the motherboard connector came off. Can I buy a new motherboard, or should I just use it for parts? Model EMC2374 Please look on the bottom of the stand and give us your exact model and EMC number so we know if you are talking about a 1999 model or a 2016 model.

Chosen Solution My 2002 Mazda 626 car shakes alot. I was told it was the idle and Im trying to find out, Where s it located? Can I do it myself and what does it require? If a pic can be sent or posted it would be greatly appreciated Take it in to an Auto Zone and get a free computer diagnostic, then fix what it tells you is wrong....

Chosen Solution Does the steering wheel lock when key is removed from the ignition on 2003 Chevy 1500hd. Hi Charles, It does indeed lock. When I remove the key from the ignition in my brother’s 2004 and start turning the wheel, the wheel locks. Jasen

Chosen Solution Good morning to everyone! I’ve a lot of problem with my old iMac. I’ve changed the CPU (with a Penryn unit) and I’ve worked with it for some months now with no problems. A few days ago, the iMac doesn’t want to turn on, and nothing happens when I push the power button, no fan, no display… Nothing. I thought the PSU was bad, and I’ve changed the PSU out, but nothing happens…....

Chosen Solution iMac won’t start up to desktop screen and only loads up to white screen with apple in the beginning then reboots. I sent it in for diagnosis at an Authorised Apple Repairer and they advised the following on computer: Blind CSD failed CPU core current on logic board. Suspect intermittently failing main logic board. They would not repair it as they said that Apple no longer supplies parts for this older model....

Chosen Solution I’ve just replaced the digitiser on my son’s iPad mini 2. When I turn it on the Apple logo appears and then the iPad turns itself off. The only way way to get it to turn on again is to disconnect and then reconnect the battery. If hold the power button and home button I get the same thing. Apple logo appears but then goes off. Its not a backlight issue as the logo he logo appears fully backlit before disappearing....

Chosen Solution hello friends, i changed lcd on an iphone 5g. i left the iphone 5 on the table for about 3 weeks. battery was of course empty. when i try to charge it shows me “the connect to itunes sign” changed the battery and restored it via itunes, same issue. i cannot put it in dfu mode, dont know why. appreciate your help. thank you in advance. It’s one of three things....